Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 36

Thread: early series, project for the dad and kids?

  1. #21
    Join Date
    Dec 2006
    Location
    Sunny Pucka
    Posts
    3,138
    Total Downloaded
    0
    The cap only goes on one way. The leads should lead out of the cap away from the engine.

    Mate if you do get her and you need refrence pic from any point of veiw send us a pm and i'll take what you need. I have a 1957 88''

    Easo

  2. #22
    Join Date
    Aug 2007
    Posts
    1,481
    Total Downloaded
    0
    Maybe the 1600 engine is different then. My 1600 has the leads facing towards the engine. An early 86"/107" manual that I consulted also showed it this way around. It might be an early/late thing.

    Aaron.
    Attached Images Attached Images

  3. #23
    Join Date
    Oct 2007
    Location
    Red Cliffs
    Posts
    295
    Total Downloaded
    0

    Cap

    Its a type of Dissy thing.
    Dennis

  4. #24
    Join Date
    Jul 2006
    Location
    East-South-East Girt-By-Sea
    Posts
    17,662
    Total Downloaded
    1.20 MB
    Everyone's an expert! Me included.

    The distributor on the spread bore 2 litre is a different animal as is the cap.

    The BVX Lucas distributor from the 1595cc and Siamese bore 1997 cc engines were also used on multiple other vehicles (including 6 cyl Jaguars) and had a variety of caps. When the distributor was used on the Standard Vangard (engine in TE20 Ferguson tractors) it sits on the RHS of the engine and the leads need to exit on the RHS otherwise they rub on the block, wear through and short out. The cap in question is probably one off a Vangard engine.

    There were some LH exit caps used on Land Rovers, but are very hard to find and mostly the only ones available today are the vertical exit leads which rub on the underside of the bonnet on the Land Rover.

    Diana

    You won't find me on: faceplant; Scipe; Infragam; LumpedIn; ShapCnat or Twitting. I'm just not that interesting.

  5. #25
    Join Date
    Oct 2007
    Location
    Red Cliffs
    Posts
    295
    Total Downloaded
    0

    Hi Diana

    True but as a said before the Landy in the pic. I think is a Siamese bore 1997 cc engine and thus a 1954 86". But the cap is still right. Never seen a 86" or later exiting any other way but left.
    Dennis

  6. #26
    Join Date
    Jul 2006
    Location
    East-South-East Girt-By-Sea
    Posts
    17,662
    Total Downloaded
    1.20 MB
    Quote Originally Posted by dennisS1 View Post
    True but as a said before the Landy in the pic. I think is a Siamese bore 1997 cc engine and thus a 1954 86". But the cap is still right. Never seen a 86" or later exiting any other way but left.
    Dennis
    I have never seen one of the small dissy's with leads exiting any other way but left (or vertical), but on the large dissys some of which I have seen on 1954's, I have seen caps with the leads exiting both ways. In fact I had to do a double take when I found the first one. Sat 2 caps down together with the arched knotch in the same place and one had the leads on the right and the other had the leads on the left.

    When you look at the Lucas catalogues they make no mention of the handedness of the cap.

    Will see if I can track down the LH cap and take some pics.

    Diana

    You won't find me on: faceplant; Scipe; Infragam; LumpedIn; ShapCnat or Twitting. I'm just not that interesting.

  7. #27
    Join Date
    Sep 2007
    Posts
    703
    Total Downloaded
    0
    hmmm, just made an offer... a cheeky one I must admit. counter offer of $800. At least I know where I stand now.

    I might go and talk to him with cash on saturday after taking the kids to see Armygeddon with the NE boys.

    Oh. I'd better ask if kids are ok

  8. #28
    olmate Guest
    Have you had any joy with this Landy yet mate ?

  9. #29
    Join Date
    Sep 2007
    Posts
    703
    Total Downloaded
    0
    nope.

    Relly vist saturday arvo--->evening, netball sunday then some napping before night shift.

    I have a mate from Melb arriving in albury on saturday morning and will be carting him to Myrtleford for Long Tan memorial at the RSL. I'll take a trailer and talk turkey then.

    cheers

  10. #30
    Join Date
    May 2007
    Location
    Wandiligong Victoria
    Posts
    862
    Total Downloaded
    0
    This isn't the one at Ovens is it?

Page 3 of 4 FirstFirst 1234 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!