Thread: '54 S1 86" Gearbox Mounts

Each year at the Bendigo swap meet there is a retailer selling rubber bits, light mounts, engine mounts etc. For the last 3 years he has had sets of mounts off some thing that are the same as the lower large cone bit with bolt, washers and nut the top bit is a little different but looks like it would do. I have only one set left and meant to buy some last year.
Can’t remember the name of the retailer will try to find out.
Dennis

Originally Posted by dennisS1

Each year at the Bendigo swap meet there is a retailer selling rubber bits, light mounts, engine mounts etc. For the last 3 years he has had sets of mounts off some thing that are the same as the lower large cone bit with bolt, washers and nut the top bit is a little different but looks like it would do. I have only one set left and meant to buy some last year.
Can’t remember the name of the retailer will try to find out.
Dennis

Classic Obsession?

John

I saw a range of mounts that looked like it might include a suitable one for the gearbox in a catalogue for Dunlop Industrial Sales, many years ago now. But you might try an engineering supply firm with a good range, they could be available for general machine mounting

Try Mackay Industries. They make a large range of rubber mounts for a lot of applications. They used to have something close .

**edit**

Heres the catalog from there website. Look at page 58
http://mackayrubber.com.au/pdf/industweb.pdf

Are these the type of rubber mounts that you are looking for?

Aaron.

Hey Aron where did you get them from? and do they have any more???

Hi
do not cut your wrist's
any mount that has a similar cross section will do the job
there are 100's of profiles out there that will do the same job
just make sure it is similar in hardness
cheers
Ian

I may have a spare let lying around.

Aaron.