Thread: series 2a door hinges

Originally Posted by Lotz-A-Landies

However, don't get me wrong but your mate's ex RAF SII is highly highly modified including a perkins diesel engine and one piece windscreen.

Yes I realise that. I was just putting it out there as an option.

The rubber block on the guard is common on S1's, isnt it?

(and that windscreen looks to be more than 1 piece )

Originally Posted by d@rk51d3

The rubber block on the guard is common on S1's, isnt it?

Sure is:


Many Series 1's have bent wings too....despite the rubber stopper. (Bloody wind!)

The door stops on a series 2 are easy to make if the tube is still under the dash and the bit is still on the door. The right length bolt cut the head off flatten out the end drill a hole. The rubber dampers can be made out of soft rubber or an old thong is good, and a washer........

I have all the bits to do it looke like the nut was not on the one on the drivers side which let it swing round ad give the guard a hammering...

there was still one on the passenger side when I took the door off last night so will reuse them