In Feb of 1958 about 100+ series 2s were dispatched from Solihul for Australia. They were the 1st ones to be dispatched
Do any of these still exist ?
They will probably have some of the earliest unit numbers in the world
Cheers Richard
 Wizard
					
					
						Wizard
					
					
                                        
					
					
						 Wizard
					
					
						Wizard
					
					
                                        
					
					
						A significant factor in the survival rates of series Landrovers in Australia is that many hundreds from the non rust belt regions were sold on to the Island of Nauru .Queensland and NSW specimans tended to rust away due to the more corrosive humid environment up there.
From memory the 2 litre powered s11 I knew about was one of about a dozen LandRovers I drove down to Port Melbourne Docks about 12-15 years ago to be shipped to Nauru. With the phosphate and salt air they'd all be well dissolved by now.
Wagoo.
142800001 was the first SII trialled by the Army Testing Establishment in 1958, it was transferred from the Dept of Supply to the Army. The date of disposal was 5/6/1963. Interestingly the vehicle was fitted with an early 1958 109" engine (151800031) which may have have actually been a 2 1/4 litre as it is unlikely that such an early 1958 engine would have been available from the Army supply chain for later retrofit. AFAIK it's current location is unknown.
107-671 88 1958 - Series 2 S2 Series 2 'Regular' 151800031 142800001 - Vic. APR photo 'C?67999'; supplied by manufacturer for appraisal, UK 'tilt'. Truck, 1/4 Ton, Rece 05.06.63
Images and data courtesy REMLR & Maj Paul Handel Armour Museum Puckapunyl
The Grenville Motors Allocations Books are unhelpful in this instance. The 88" book includes a notation that the 1418 engines were the "small motor" and the first "big motor" was in the 1519 sequence. The 109 book of the same period is missing the first pages where the notations in other books are written.
Diana
You won't find me on: faceplant; Scipe; Infragam; LumpedIn; ShapCnat or Twitting. I'm just not that interesting.
Hi All
Tasmania did have two 'f' motor Series 2's, that I am aware of.
Our local series guru, Frank Sharp, did own one of them, that he sold on to a local welding business Owner, who did install a Holden grey motor into it, it was to run the pto driven Lincon welder.
The Holden didn't last twelve months, so the Owner put the original 2 litre Land Rover motor back in and it went on, lasting for years. The owner never went back to using Holdens and he went on to buy another with the same size 2 Litre motor as they were so successful at their work.
If I am lucky enough to hunt down the records to show, I will.
The Tasmanian Hydro Electricity Commission did buy a lot of Series one Land Rover's, then the series two's, as they became available.
The HEC then went on and placed the biggest order for Land Rovers ever, in Australia, at that time.
I will verify these stories with Frank when he returns from warmer climes in NSW in about a months time.
Cheers Arthur
Last edited by wrinklearthur; 28th September 2011 at 09:00 PM. Reason: grusome grramor
O.K. it seems that just around 800 1958 88" were built in Sydney with a significant proportion of the late production going from Grenville Motors stock to Faulls in WA. possibly around 200, I'll count them on another day. The 1438 sequence vehicles with the 1418 sequence engines were still being sold in June 1959. The first two 1959 vehicles through Grenville's were 1429 (export "built up") sequence vehicles that were supplied to the Royal Agricultural Society in January 1959. About 300 1948 model 88" appear in the allocations books after the two to the RAS.
None of the 1438 vehicles appear to have 1518 engine numbers.
Diana
You won't find me on: faceplant; Scipe; Infragam; LumpedIn; ShapCnat or Twitting. I'm just not that interesting.
142800001 was assembled at Solihul . It was the first in the "Sales Book" with Label No1. 142800002 was No 2 in the book and they both had the 2.25 engines. All the 88s after that had the 2 litre engine until Sept 58
According to the factory minutes at Gaydon the first series 2s appeared in Feb 58. My guess is that #1 and #2 would have both been built in Feb for the Australian Army trials.
Because such an important contract hinged on their performance it would seem reasonable that Rover would have thoroughly tested them and then only sent the best one. Only a theory
They both went into the "dispatch dept " on March 24 1958 and 142800001 was secretly rushed to Melbourne for the army trials because the Series 2 was not going to be released to the world for another 3 weeks on April 16.
142800002 still exists in the UK with the original 2.25 engine but it has a new mid 1960s body.
Cheers Richard
Hi All
Less obvious was the change from the narrow track, axle assemblies to the wider wheel track, as the 'F' motor ones still had the narrow assemblies.
Where did the term 'F' motor come from? was it a term used with some early yank motor?
I can remember these motors being refered to as 'F' motors back in the 50's when there were only the series ones about.
Cheers Arthur
Last edited by wrinklearthur; 29th September 2011 at 08:43 AM. Reason: long term memory is better than the short term, what was it?
 AT REST
					
					
						AT REST
					
					
                                        
					
					
						An F-Head has one valve is in the block and one in the head supposedly forming a letter F in relation to the cylinder bore. Both valves in the Block is a L-Head (Side Valve) forming the letter L or in the Head is an I-Head (Overhead Valve) forming the letter I.
See here:
Automotive Dictionary - "FH"
Bob
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks