Ser 2a Build up Thread

[Johnno1969]

No its actually some very unclever person who decided to replace the original alloy door skin with metal one so there was no saving it.

ive only had the car just about a month and half so yeh its coming along very quickly

Yeah, I thought it did rather look like rusted steel.....

Looking at your thread, you are racing along. A month and a half? Crikey. I keep changing my projected finish date on my IIA.. Currently, it's Easter. Or sometime after that.....

[klonk]

Landygirl

My landy had a holden flywheel fitted by someone else and one tonner clutch cover, didnt know any better then, was a shocker though, would have been better with a clutch switch on the dash rather than a pedal. I think there are better options.

Forgot to say that I also used to add a tube of wynns gear suppliment to the gearbox and transferbox. used to come in a purple tube but I havent seen it around for a while. Could have a conversation with passengers at 60mph in overdrive.

Be carefull fitting a supercharger it has landrover axels remember, more torque needed ,not more power.

Cheers Steve

[Landygirl]

Landygirl

My landy had a holden flywheel fitted by someone else and one tonner clutch cover, didnt know any better then, was a shocker though, would have been better with a clutch switch on the dash rather than a pedal. I think there are better options.

Forgot to say that I also used to add a tube of wynns gear suppliment to the gearbox and transferbox. used to come in a purple tube but I havent seen it around for a while. Could have a conversation with passengers at 60mph in overdrive.

Be carefull fitting a supercharger it has landrover axels remember, more torque needed ,not more power.

Cheers Steve

We have some of that at repco in lots of different brands so it should be pretty easy to get hold of.

A friend of mine already has done the whole supercharger thing on his 2a 109 that he has been building since he was 14 so i have a good base luckily