Results 1 to 4 of 4

Thread: army springs

  1. 30th January 2012, 09:34 PM #1
    army2a's Avatar
    army2a
    army2a is offline Fossicker
    Join Date
    Apr 2011
    Location
    gold coast
    Posts
    59
    Total Downloaded
    0

    army springs

    hey guys, does anyone know if the military springs in a series 2a are standard height or raised, or is the difference in height only from the military shackles. thanks heaps guys
    Reply With Quote Reply With Quote
  2. 30th January 2012, 09:38 PM #2
    d@rk51d3 Guest
    Pretty sure the height comes primarily from the shackles.

    Although the heavy rating of the springs would keep them sitting up too.
    Reply With Quote Reply With Quote
  3. 30th January 2012, 10:47 PM #3
    isuzurover's Avatar
    isuzurover
    isuzurover is offline Swaggie
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    The extra height comes from the shackles and extended spring hangers.

    The front springs are (should be) standard 109" 11-leaf fronts.

    The rear springs should be "heavy duty" 8-leaf springs (7.1 mm thick leaves).

    You will get a lot of extra wheel travel if you remove 2-leaves from each pack. Search for my threads on modifying springs.
    Reply With Quote Reply With Quote
  4. 30th January 2012, 10:55 PM #4
    army2a's Avatar
    army2a
    army2a is offline Fossicker
    Join Date
    Apr 2011
    Location
    gold coast
    Posts
    59
    Total Downloaded
    0
    Ok thanks heaps guys, I thought that was the case, much appreciated
    Reply With Quote Reply With Quote
« Replacing the stock generator with an alternator | Power Problem »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!