Results 1 to 3 of 3

Thread: Tray back Tailpipe

  1. #1
    Join Date
    Mar 2009
    Location
    Near Geelong, Vic.
    Posts
    453
    Total Downloaded
    0

    Tray back Tailpipe

    Can someone post a photo to show me the way the exhaust tailpipe exits on a tray back.

    One of my rear guards (O/S) has a cut out but the system I removed (Holden conversion) exits straight out the back under the tail lights?

  2. #2
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,511
    Total Downloaded
    0
    Standard system is different between four and six, but in either case the system is identical between trayback and ute/hardtop bodies. The four exits straight out behind the RH rear wheel and below the body, and the six exits straight back behind the LH rear wheel below the chassis cross member, again, irrespective of the body type.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  3. #3
    Join Date
    Mar 2009
    Location
    Near Geelong, Vic.
    Posts
    453
    Total Downloaded
    0
    Thanks John, but does it poke out at a right angle to the chassis rail or does it turn 90 degrees to the rear behind the wheel & thru the mudguard? (it's originally a 4)

    I suspect the latter if the guards I have are original fixtures.
    Last edited by geodon; 23rd April 2012 at 11:33 AM. Reason: more info

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!