Page 1 of 5 123 ... LastLast
Results 1 to 10 of 43

Thread: Bitten By The Bug

  1. #1
    Chris72 Guest

    Bitten By The Bug

    After buying the series 1 I put out the word I was looking for land Rover parts and have to admit word of mouth seems to be working for me, I found a original series 1 manual for $20, but the more exiting find was a series 2 wagon complete that had been restored over 20 years ago, all the rust cut out from chassis and apparently there wasn't a lot to start with, painted with 2pak has the original 6 cylinder motor and gear box, safari roof, plus a set of chrome sunraisers with good tyres, The hole thing just needs put back together, motor needs rings as it was a using quite a bit of oil. anyway enjoy the pic's

    Cheers Chris

    [IMG][/IMG]
    [IMG][/IMG]
    [IMG][/IMG]
    [IMG][/IMG]
    [/IMG]
    [/IMG]
    [IMG][/IMG]
    [IMG][/IMG]
    [IMG][/IMG]
    [IMG][/IMG]

  2. #2
    Join Date
    Mar 2012
    Location
    Porongurup Western Australia
    Posts
    332
    Total Downloaded
    0
    I know what you mean, I bought my first Landy, a 1970 IIA nearly 5 years ago the 3 years after that I bought my 1976 Series 3 and Last year I bought my 1976 Range Rover. With finding stuff at the right time, I was about to give up on findind a 202 to replace the 2.25 when she lets go and a week later I found one and the bloke said I could have it for free and yeatersay I went to a book sale and I found a How to Tune your Holley book which is handy for the V8 100" and I also found a Holden workshop manual for the 202. If its at a fair price it'd be worth it having a good chassis body and an original 2.6 6cyl. And it's a county or has county stickers.

  3. #3
    Chris72 Guest
    The bloke I'm get this this from seems to know his his stuff, he was telling me how he was going to put a hemi 265 in this useing an adapter plate and fitting it to a landcrusier box, but Im not getting them in the deal, it's already had the orignal diffs replaced with sulsbury diffs and the only parts missing are the front seats as he had valiant bucket's in there and he used them on another project, aswell as the chassis bolts but he did say there floating around in his shed somewhere, Don't think it's the country just the sticker's.
    I must admit I do like colecting.

    Cheers

  4. #4
    Join Date
    Mar 2012
    Location
    Porongurup Western Australia
    Posts
    332
    Total Downloaded
    0
    The 265 Hemi wasn't a very common conversion but a good few people have done it and said it's fantastic but many prefer the 245 or 225. The salisburys will help strength wise, If they've been changed to a higher ratio that would make it a much nicer road vehicle. Looks like it's a late IIA wagon not Series II judging by the headlights being on the wings but they could have been retro fitted. Sounds like its going to be a good project keep us posted.

  5. #5
    Chris72 Guest
    It's a 1971 if that helps I.D. it, this one is going straight in my shed in the next couple of weeks, have to organise a trailer to pick it up first, In the meantime I still have the series 1 to sort out which needs more work than I anticipated, mainly wiring and brakes as I'm half way into the engine change over.

    Cheers Chris

  6. #6
    Join Date
    Mar 2012
    Location
    Porongurup Western Australia
    Posts
    332
    Total Downloaded
    0
    That's definetly a IIA then being a 1971, one of the very last IIA's. They have that bit more reliability cause they were in production for longer than the SII and they had ironed out most of the faults. Thats what I've heard and read but I don't know I've never driven or owned a SII, I've only driven my IIA.

  7. #7
    Chris72 Guest
    I'm having thoughts about passing on the series 1 ute cab and concentrating on this one, seems this is in much better condition, the ute would be a much longer project but nice when finished.

    Cheers Chris

  8. #8
    Join Date
    Mar 2012
    Location
    Porongurup Western Australia
    Posts
    332
    Total Downloaded
    0
    A fully restored Series I is worth quite a bit and they are very sought after but it's your decision, the IIA is a good looking wagon if you look past the dust and missing panels, and certainly much better road vehicle compared to the Series I.

  9. #9
    Join Date
    Jan 1970
    Location
    Irymple, Victoria, Australia
    Posts
    2,902
    Total Downloaded
    0
    Late Series 2A not a Series 2!
    Nice find too!

    Cheers, Mick.
    1974 S3 88 Holden 186.
    1971 S2A 88
    1971 S2A 109 6 cyl. tray back.
    1964 S2A 88 "Starfire Four" engine!
    1972 S3 88 x 2
    1959 S2 88 ARN 111-014
    1959 S2 88 ARN 111-556
    1988 Perentie 110 FFR ARN 48-728 steering now KLR PAS!
    REMLR 88
    1969 BSA Bantam B175

  10. #10
    Chris72 Guest
    The guy I'm getting the 2a from said it can stay in his shed until I'm ready to pick it up which is a bonus, as soon as I sell my boat I'll be able to make room for them both, It's funny the more I work on the series 1 the more I like it, I originally bought it for a wood/fishing bus but now I would love to find a 2.25 and get it back as close to original as i can, when I first got it I was thinking of painting it flat black with limestone white wheels but now I can only see it in olive green lol .

    Cheers Chris

Page 1 of 5 123 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!