Reply With QuoteI am pretty sure they are the same as for the LWB. If you are thinking about the 4cyl with 10 gal side fuel tank. Just checked 1 in the shed and they are 5/16"
Cheers Scott
SysAdmin (Owner)
what diameter are the fuel pickup tubes in a swb fuel tank
?
TIA
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
I am pretty sure they are the same as for the LWB. If you are thinking about the 4cyl with 10 gal side fuel tank. Just checked 1 in the shed and they are 5/16"
Cheers Scott
SysAdmin (Owner)
much obliged, thankyou..Originally Posted by schuy1
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
Wizard
SupporterHmmm. I just bought some fuel lines... I think they're 3/16". Wonder if they'll draw enough fuel through.....
Umm, that 5/16 was the OUT side diam. of the pick up tube that goes down in the tank. I am pretty sure the INSIDE diam of the fuel lines to the pump and motor are 3/16.
Wizard
SupporterThanks. Well, that makes sense, 'cos I looked at my old fuel lines yesterday and it I appear to have been running around on 3/16" lines for years without a problem anyway....
Cheers,
John
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks