pm sent thankyou
Printable View
pm sent thankyou
hi go round and give a spray of inox all round will help 2or3 days before regards jimQuote:
Originally Posted by lowmion
Scans sent.
Here is a link to the gearbox rebuild on my Series III http://www.aulro.com/afvb/other-powe...ml#post1716272
The gearbox was out of the car when I got it so it was rebuilt & put back in.
I cleaned the outside thoroughly before starting then worked on the garage floor breaking the box down into the three main components (gearbox, transfer box and front output shaft). Take pictures as you go.
Colin
I forgot the photo's, but I've havnt gotten the seat box all undone yet so there's still time, and I havnt yet done an intro on it so two birds one stone.
I dont know what inox is but I've certainly sprayed it all with some WD, the gearbox itself shouldnt be much of a pain due to new clutch etc being put in 18 months back.
Reading your rebuild post thnx for the link
Heh just googled it, a lanolin lubricant spray from super cheap :DQuote:
Originally Posted by lowmion
I've taken photos of the progress, but am stumped on how to reduce the jpegs to a size allowed to be uploaded.(it appears it does it automatically)
I've removed the seat box and then school holidays appeared causing a cessation in all works until next week.
Some of the bolts took literally ages to get undone, but most were relatively easy.
having problems uploading so will have to come back to this later :D
What is the problem? I can click on your thumbnails and view your photos.
The answers easy, using my phone to upload, can't rotate the photos, will have to use the laptop to upload them properly
Is that all?
I can tilt my head 90 degrees to the left, so I didn't realise there was a problem. :D:D:D