Results 1 to 7 of 7

Thread: next hurdle - the carby

  1. 26th November 2014, 03:40 PM #1
    SII Josh
    SII Josh is offline Master
    Join Date
    Jul 2013
    Location
    ravenswood, Western Australia
    Posts
    352
    Total Downloaded
    0

    next hurdle - the carby

    Hi everyone,

    after sorting out the issue of getting fuel to the carby, i now have another question (surprise surprise)

    If any one has time are you able to take a snap shot of the way your throttle linkages are connected to your carby.

    for some reason i can't work it out, when i connect them to the carby it pushes up rather then pull down??? i am sure it will be a newbie mistake

    cheer for your help everyone

    PS: it ran really well this morning considering it has been idle for 8 years, started on the third press of the button
    Reply With Quote Reply With Quote
  2. 26th November 2014, 04:52 PM #2
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    Which carburettor?

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  3. 26th November 2014, 05:33 PM #3
    jamesnedtaylor's Avatar
    jamesnedtaylor
    jamesnedtaylor is offline Master
    Join Date
    Jan 2014
    Location
    coes creek
    Posts
    170
    Total Downloaded
    0
    ImageUploadedByAULRO1416987125.254534.jpgImageUploadedByAULRO1416987169.990434.jpg
    I have the 2.25 with a zenith if you need anymore ask if it's the same as yours
    Reply With Quote Reply With Quote
  4. 26th November 2014, 06:27 PM #4
    chopper
    chopper is offline Master
    Join Date
    Jul 2008
    Posts
    312
    Total Downloaded
    0
    Is the lever that connects to the rod that runs across the firewall arse about face. That's the lever at the back end of the connecting rod to the carby linkage.
    Reply With Quote Reply With Quote
  5. 26th November 2014, 07:24 PM #5
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    Quote Originally Posted by jamesnedtaylor View Post
    ImageUploadedByAULRO1416987125.254534.jpgImageUploadedByAULRO1416987169.990434.jpg
    I have the 2.25 with a zenith if you need anymore ask if it's the same as yours
    Try this - sorry its a bit blurry, but you should be able to work it out.

    John
    Attached Images Attached Images
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  6. 26th November 2014, 07:49 PM #6
    SII Josh
    SII Josh is offline Master
    Join Date
    Jul 2013
    Location
    ravenswood, Western Australia
    Posts
    352
    Total Downloaded
    0
    ahhh yes it would help if you all knew what carby i have hooked up

    we currently have a holden stromberg fitted, this carby was the carby that was on it when we last had her running (7-8 years ago) so have fitted it for now as we know it worked fine last time. After firing her up today i can say she still runs good on the stromberg.

    We have just got to work out the linkages for the throttle on the carby end.

    will now go back and read your helpful posts
    cheers everyone
    Reply With Quote Reply With Quote
  7. 26th November 2014, 08:59 PM #7
    SII Josh
    SII Josh is offline Master
    Join Date
    Jul 2013
    Location
    ravenswood, Western Australia
    Posts
    352
    Total Downloaded
    0
    well after digesting all the photos and info, and having a beer and pizza this is the final outcome with the help of Jamesdtaylor, John and Chopper.

    It works so i must be close enough
    Attached Images Attached Images
    Reply With Quote Reply With Quote
« Railco to bearing conversion | fuel pump query »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!