clutch pivit end bit

**Gavo** · 24th January 2017, 03:46 PM

clutch pivit end bit
I need the bit that goes on the end of the clutch arm and joint it to the throwout unit.
Can't find mine.
even a sample would be good and I will make a new one.

**JDNSW** · 24th January 2017, 07:56 PM

Not clear which bit you are after - do you mean the bit of pipe with two crossholes (top right in your picture)?

This looks simple but if making one, be careful - it is hardened, and so are the pins. Should be able to get one from any of the people selling Series parts, or at worst second hand from someone wrecking a Series - but clarify which bit you need.

John

**Gavo** · 24th January 2017, 08:27 PM

Originally Posted by JDNSW

Not clear which bit you are after - do you mean the bit of pipe with two crossholes (top right in your picture)?

This looks simple but if making one, be careful - it is hardened, and so are the pins. Should be able to get one from any of the people selling Series parts, or at worst second hand from someone wrecking a Series - but clarify which bit you need.

John

Yes it the bit with cross drilled holes. Thanks for you info. I will look for a new one and the pins

**67hardtop** · 24th January 2017, 08:40 PM

You can still buy those bits new including the pins. Bought exactly that when my tube split while driving. Someone had used bolts and tightened them up so much it deformed the tube so it broke eventually. Bit hard to find but still available.

Cheers Rod

Thread: clutch pivit end bit

Thread Tools

clutch pivit end bit

Bookmarks

Bookmarks

Posting Permissions