Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Early series 2 brake reservoir.

  1. 31st July 2018, 10:28 AM #1
    Kimsl70's Avatar
    Kimsl70
    Kimsl70 is offline Master Gold Subscriber
    Join Date
    Feb 2018
    Location
    Adelaide
    Posts
    122
    Total Downloaded
    0

    Early series 2 brake reservoir.

    Hi all,

    In tearing down the brake system my brake reservoir is U/S, Maggie has a CB master cylinder. My question are two fold.
    a. [deleted advert - put it in the Markets]
    b. Can I use a CV brake reservoir (as they seem to be the only ones available) on a CB master cylinder (my gut is no, due to brass line spigot on the bottom of the reservoir)

    Cheers
    Last edited by p38arover; 6th August 2018 at 03:03 PM.
    Reply With Quote Reply With Quote
  2. 31st July 2018, 01:55 PM #2
    incisor's Avatar
    incisor
    incisor is offline SysAdmin (Owner) Vendor
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,688
    Total Downloaded
    32.38 MB
    you can get them out of England last time I looked.

    I am running an original res and the newer master cylinder so yes you can mix and match...
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
    Reply With Quote Reply With Quote
  3. 31st July 2018, 01:57 PM #3
    gromit's Avatar
    gromit
    gromit is offline ForumSage Supporter
    Join Date
    Jan 1970
    Location
    Narre Warren South
    Posts
    6,796
    Total Downloaded
    0
    Not cheap but available.....
    Brake and Clutch Fluid Reservoirs - Pegasus Parts remanufacture new Land-Rover bulkheads for Series models.


    Colin
    '56 Series 1 with homemade welder
    '65 Series IIa Dormobile
    '70 SIIa GS
    '76 SIII 88" (Isuzu C240)
    '81 SIII FFR
    '95 Defender Tanami
    Motorcycles :-
    Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C, Suzuki SV650
    Reply With Quote Reply With Quote
  4. 31st July 2018, 02:17 PM #4
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,511
    Total Downloaded
    0
    The reservoir is the same on all 2a four cylinder, and on 6 cyl up to suffix 'F' (booster after that) - but there are five different pipes from the reservoir to the m/c!
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  5. 31st July 2018, 02:42 PM #5
    Kimsl70's Avatar
    Kimsl70
    Kimsl70 is offline Master Gold Subscriber
    Join Date
    Feb 2018
    Location
    Adelaide
    Posts
    122
    Total Downloaded
    0

    Thank you

    G'day all,
    Thank you very much for all the replies. I'll have a look at options but at least I know that I can mix and match (probably what I'll do). You guys are the best brains trust about ..


    Cheers
    Reply With Quote Reply With Quote
  6. 1st August 2018, 12:07 PM #6
    OneOff's Avatar
    OneOff
    OneOff is offline Master
    Join Date
    May 2016
    Location
    Guanaba, QLD
    Posts
    462
    Total Downloaded
    0
    Quote Originally Posted by gromit View Post
    Not cheap but available.....
    Brake and Clutch Fluid Reservoirs - Pegasus Parts remanufacture new Land-Rover bulkheads for Series models.


    Colin
    Thanks for the link Colin, my usual UK supplier is having Aust GST issues so I've just picked up a few items from Pegasus.
    OneOff
    SLOw OR63

    https://www.aulro.com/afvb/series-ii...series-ii.html
    Reply With Quote Reply With Quote
  7. 1st August 2018, 12:32 PM #7
    JohnboyLandy
    JohnboyLandy is offline Master Subscriber
    Join Date
    Jul 2016
    Location
    Gold Coast
    Posts
    522
    Total Downloaded
    0
    Hey Peter, who's your usual UK supplier with GST issues ?

    Thanks
    John
    Reply With Quote Reply With Quote
  8. 2nd August 2018, 07:19 PM #8
    OneOff's Avatar
    OneOff
    OneOff is offline Master
    Join Date
    May 2016
    Location
    Guanaba, QLD
    Posts
    462
    Total Downloaded
    0
    John Craddock.
    Apparently due to changes in Aust GST law they now have to register. Don’t know much about it but I was waiting for weeks and it still hasn’t been resolved.
    Its a shame, I’m quite happy with their service and pricing.

    Peter.
    OneOff
    SLOw OR63

    https://www.aulro.com/afvb/series-ii...series-ii.html
    Reply With Quote Reply With Quote
  9. 2nd August 2018, 08:28 PM #9
    Dgd69's Avatar
    Dgd69
    Dgd69 is offline Master Supporter
    Join Date
    May 2014
    Location
    Perth
    Posts
    404
    Total Downloaded
    0
    Quote Originally Posted by OneOff View Post
    John Craddock.
    Apparently due to changes in Aust GST law they now have to register. Don’t know much about it but I was waiting for weeks and it still hasn’t been resolved.
    Its a shame, I’m quite happy with their service and pricing.

    Peter.
    Totally agree they been great till now been waiting for a month now fully paid for items and freight still not sent
    1960 series 2 143001010
    1976 series 3 91331709c
    06 discovery v6
    2014 discovery tdv6
    2010 cub supamatic drover
    Reply With Quote Reply With Quote
  10. 2nd August 2018, 09:26 PM #10
    1950landy's Avatar
    1950landy
    1950landy is offline YarnMaster Supporter
    Join Date
    Sep 2012
    Location
    Westlake ,brisbane
    Posts
    3,922
    Total Downloaded
    0
    Me too, always used Craddock's found price , service , delivery & freight very good. Havn't bought anything off them for about 6 months. Have noticed a lot of suppliers in UK & US on ebay no longer post to AU now.
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Ouch, prop shaft grinding on engine mount bracket | Rock Sliders for Maggie »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!