Thread: How do I remove the pedal shaft?

Once you remove the pin there is nothing except friction holding the shaft. A press or a little heat will help.

From memory it only taps out one way.

whitehillbilly

Been 45 years since I did one of those..... this might help.

Originally Posted by Tins

Been 45 years since I did one of those..... this might help.

Great thanks really good piccies, at least I will know how to put it back together, now all I need to do is to get it apart!!!!

I'll go down the Star Wars track (ie may the force be with me!)

Jon

I have achieved the impossible and removed the pedal shafts.

7 days of spraying with WD40 and lots of force (in the vice) and they came loose.

Not sure if they only come out one way, but I did it from the oiler side, ie the side with the smaller opening ie the one shown entitled brake pedal shaft with oiler

Took some pressure and it released with a bang but no damage, so now I can clean and paint the pedals and pedal box.

Wait until you tackle the steering relay.....