Operation Ralph!

If you can't get/find one. I am about to pull one off a S2A that I know works as I have used it,you can have it for free, Just let me know when you need it.
I am hoping to start stripping the ol' girl this week weather permitting.

Thanks mate, much appreciated. I may take you up on it. I have to go to Sydney in a month or so, so I might drop in if that's ok.
Found this (link below) which clears up a lot of confusion, I was right for once (one in a row :p)
one is the low fuel light and the other is the glow plug light. I was wrong about the indicator light though (optional extra) bottom left is the charge light.

http://www.retroanaconda.com/landrov...manual/‎

I never thought of a glow light but it makes sense.
No worries I may be at armidale or singleton let me know roughly when you may be passing through. I leave on the 28th of june to move to armidale but I may be back in singleton.
Or i may go to gold coast again soon if all else fails I can send it

Cheers Tony, I owe you a drink or 6.:cool:

na it is all good, maybe when you are finished i can ride shotgun for a short trip :p

Done Deal, But I wont be going to Armidale this time of year in it!!:eek2:

I am not looking forward to it either.
If there are any other parts you are after just let me know and I will see what I can find

Quote:

---

Originally Posted by ezyrama

Hi Pete/ Tony
The hi beam light is on the LH gauge so at the moment it has me stumped. The key is under the RH gauge on the firewall, it's a diesel and apparently that's where they were with a starter button (still gotta find one of those)

---

I got a spare starter button if you need one Ian, just let me know.

Cheers Jeff

Thanks Tony/Jeff. I managed to get the dash and indicators completely wired up on the weekend, replaced the flasher can and fixed some wiring on the light mounted on the end of the indicator stalk, re-fitted the exhaust system temporarily fitted until road ready, then I'll have a new system fitted so I can unleash that HUGE 62hp @4000rpm:D. I have also fitted a new 3 fuse holder assembly on the bulkhead so I can split up the circuits a little bit which I still have to attack, I then committed a neatness and tidied the Landy shed (as it's known) and found a few items I though I had lost. If anyone needs a S3 plastic grille, let me know.

Cheers Ian

I have attached the owners manual file as the link above doesn't seem to work.