Not sure.The standard ones are welded on the same way so i did it the same as original.Quote:
Originally Posted by jakeslouw
Printable View
Not sure.The standard ones are welded on the same way so i did it the same as original.Quote:
Originally Posted by jakeslouw
Ok engine is back in went in quiet easy so was happy about that..
I need to cut off the bumpstop bracket off the chassis once i do that i'll bend the bit that bolts to it so that its up on the side of the chassis & weld a nut in there so the bumpstop bolt can go into there..
https://www.aulro.com/afvb/images/im...013/01/659.jpg
https://www.aulro.com/afvb/images/im...013/01/660.jpg
https://www.aulro.com/afvb/images/im...013/01/661.jpg
https://www.aulro.com/afvb/images/im...013/01/662.jpg
https://www.aulro.com/afvb/images/im...013/01/663.jpg
good work, It is good to see some progress on him
what is next on the list once you have finished with the engine?
Hi Banjo,
I have taken some photo's of the radiator mounts for my Stage One but am having difficulty uploading them to my Flickr account. I will have another go tomorrow morning and see if the images will upload. Looks like you did a fair bit today.
Regards Warrick.
Looking good Jason :BigThumb: I'm getting close to starting my 300 tdi conversion, just can't decide which gearbox to use :confused: I'm going to put the defender power steering in too ;)
Images uploaded. Hope they are of use.
Regards Warrick.
https://www.aulro.com/afvb/images/im...013/07/270.jpg
Bottom-Radiator-Mounts by wpalmo, on Flickr
https://www.aulro.com/afvb/images/im...013/11/388.jpg
Right-Hand-Bottom-Radiator-Mount by wpalmo, on Flickr
https://www.aulro.com/afvb/images/im...013/07/271.jpg
Right-Hand-Bottom-Radiator-Mount-2 by wpalmo, on Flickr
https://www.aulro.com/afvb/images/im...013/07/272.jpg
Left-Hand-Bottom-Radiator-Mount by wpalmo, on Flickr
https://www.aulro.com/afvb/images/im...013/07/273.jpg
Left-Hand-Bottom-Radiator-Mount-2 by wpalmo, on Flickr
Nice work! I wish I was game to weld engine mounts :( What will happen when you go for a road worthy/rego? Will they want engineering certs on that?
I noticed in your photos that the steering relay (through the front crossmember) is missing! Did you weld that up? ? ? Are you not going to steer this one? :p
Yeah it all has to be engineered . the mounts the engine the gearbox the seats the wheels the power steering..Quote:
Originally Posted by debruiser
Yep i cut the relay out cause i put power steering on all mine using a toyota 60series power steering box..Go back in this thread & you'll see how i cut it out & got it ready for the steering box..My Green one has it done aswell..One handed parking even in a crowded carpark :D
Thanks Warrick thats excactly what i needed..I was pretty sure the radiator sat in the top of those mounts..Does anyone know if it is possable to buy these mounts anywhere or am i going to have to make them..