Reply With QuoteI might have three of those, could have a look tomorrow_ oops today.
Mums home, bye all.
ForumSage
SupporterI have a front apron for a Series III I'm working on but the mounting brackets are missing.
345192 FRONT APRON PANEL BRACKET | shop | www.lrseries.com
Easy enough to make but what dimension is the 'step' in the middle.
From the picture it's bigger than the front panel bolt hole (3/8") so maybe 1/2" roughly ??
Colin
'56 Series 1 with homemade welder
'65 Series IIa Dormobile
'70 SIIa GS
'76 SIII 88" (Isuzu C240)
'81 SIII FFR
'95 Defender Tanami
Motorcycles :-
Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C, Suzuki SV650
ForumSage
I might have three of those, could have a look tomorrow_ oops today.
Mums home, bye all.
ForumSage
SupporterThanks Arthur,Originally Posted by wrinklearthur
I could make them easily enough and probably guess at the dimension but if you have a couple.......
Colin
'56 Series 1 with homemade welder
'65 Series IIa Dormobile
'70 SIIa GS
'76 SIII 88" (Isuzu C240)
'81 SIII FFR
'95 Defender Tanami
Motorcycles :-
Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C, Suzuki SV650
ForumSage
Hi Colin, I definitely have a set of those brackets on a S3 wreck I have here, it still has the panel attached to it as well.
The series 3 is the later build with the anti bust door latch, but that front panel looks like it is the same as the late S2A I have here as well.
I'll have a go at taking it off for you in the next day or two, when that's done I will see if there is a Local Landy Lad heading north for the winter.
.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks