Thread: Series 3 front lockers ???

Free wheeling hub
So not standard

As above, they were an optional extra - came in a variety of brands and I don't recognise that one. They are only a marginal advantage, if that, and if they need overhauling, my thought woulld be to simply replace them with the standard drive flanges and hubcaps.

John

Thanks John ... can I get the drive flanges and hubcaps locally or must I go overseas

Drive flanges should be available new from any of the Landrover parts suppliers in the country, but you may get good s/h ones from someone here - have a look in the markets section, put wanted ad in if necessary.

If you give a more local address you might even get an offer from someone reading this thread.

Drive flanges are interchangeable from Series 1 to the end of Series production, but note that they come in ten spline and 24 spline. The 24 spline were fitted to lwb (109) Series 3 to match the ones on the rear salisbury axle, and late Series 3 88s also had 24 spline. But since the axles are interchangeable from Series 2 on, it is advisable to check what you actually have!

John

Originally Posted by Themadmob

Thanks John ... can I get the drive flanges and hubcaps locally or must I go overseas

Locally available. - Land Rover Parts - WHEEL BEARINGS & HUB SEALS - SERIES 1, 2 + 3