The same brackets as fitted to a Series II. There are tabs with holes in already on a Series III front panel, just need the brackets.Quote:
Originally Posted by whitehillbilly64
Colin
Printable View
The same brackets as fitted to a Series II. There are tabs with holes in already on a Series III front panel, just need the brackets.Quote:
Originally Posted by whitehillbilly64
Colin
I agree.Quote:
Originally Posted by gromit
Often referred to as the "Maltese Cross" or "Chevron" grille.
Cheers, Mick.
The steel grill, looks better than the plastic one.
Pulled the wiper shaft apart, on Gilbert, S3
Lots of dirty looking grease. should a light grease be used on these, or a smear of oil.
Also on the RH side, behind the dash, the drive shaft appears to be uncovered, poking in and out of a short tube ???? attracting dust and dirt. A part missing, rubber or plastic cap, or that's how it was designed ????
Thanks
whitehillbilly
Thats how it is. Stupid isnt it?
I have some tent pole joiners at work. Will have a play.
Thanks.
whitehillbilly
Hi,
Looking at ideas for a windscreen washer, for my S3.
Thanks
whitehillbilly
Quickie,
Should inside the Tub be the same colour as the outside.
Thanks
whitehillbilly
SCA Universal Washer Kit - Supercheap AutoQuote:
Originally Posted by whitehillbilly64
YesQuote:
Originally Posted by whitehillbilly64
Thanks Colin.
Have a good original bottle and pump.
Was wondering, if to add jets to the bonnet, or copy a Defender type bracket.
whitehillbilly
Hi,
Was looking to add nutserts to windscreen top and make it removable, so same windscreen can be used if hard top fitted.
Anyone done this MOD ????
M5 or M6 nutserts ???? or bigger, with Button screws.
Local, Aussie Fasteners, will lend me fitting tool, and supply parts.
Thanks
whitehillbilly