Gilbert

Now, if i could just find those new little main shaft pins.[bawl]
Order some more tomorrow.

whitehillbilly

Pretty sure grooved face towards 2nd gear.
But just checking.
Thanks

whitehillbilly

Heater/blower hose stretched and re taped. Took 8m
Very happy with finish when concertina back up.

whitehillbilly

Bell Housing Finished. Nearly ????
Gearbox rear bearing, housing Loctited in.
New Reverse gear and pin, in.
Main Shaft pins here tomorrow.
The more i do with these gearboxes, the less of a mystery they really are.

whitehillbilly

Nice rainy day in the Tweed.
More time to work on Gilberts Gearbox. [thumbsupbig]

whitehillbilly

Gearbox coming together.

whitehillbilly

Hi,
Have two different Gearbox gasket/ oil seal kits.
The Front and Rear output flange seals come in two different Brands.
NAK and Corteco.
The NAk is sized imperial.
The Corteco ones are Metric, but by the metric numbers, are the same sizing as the imperial ones.
Which would be the better seal to use.
Thanks

whitehillbilly

Quote:

---

Originally Posted by whitehillbilly64

Hi,
Have two different Gearbox gasket/ oil seal kits.
The Front and Rear output flange seals come in two different Brands.
NAK and Corteco.
The NAk is sized imperial.
The Corteco ones are Metric, but by the metric numbers, are the same sizing as the imperial ones.
Which would be the better seal to use.
Thanks

whitehillbilly

---

NAK are Indian but I've had no problems with their seals.
Corteco are made is a number of different Countries, people recommend them but I have no direct experience.

Colin

Modified another tool i made to remove slotted sump plugs and added some holes.
Nut up to Torque. [biggrin]

whitehillbilly

Another part finished [biggrin]

whitehillbilly