Results 1 to 3 of 3

Thread: Head Lights.

  1. #1
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    2,023
    Total Downloaded
    0

    Head Lights.

    Hi,
    Quick question about high/low beam.
    With the light switch on, I now have high beam on both head lights. Earth problem, with LH light. Was the connections in front of the radiator.
    Took the garbage down the drive way tonight on High beam, but got the low beam to flicker, by touching the lever on the steering column.
    Do these contact just using the raised ' Brass buttons' ????
    If so they may not be touching the LOW beam connection, or dirty.
    Also, where is the on/off switch for the heater/cold air fan ????
    Basic questions. Sorry
    Thanks again for the replies.

    whitehillbilly64

  2. #2
    Davehoos Guest
    ser3 heater fan switch. 2 speed. similar-same to head light switch.
    bellow the headlight switch on the dash.
    connected to an inline aux fuse in behind the meters [dash]. fan speed resister for low speed in the heater.


    purchased a combo switch from UK. had no horn and the traficators play up. in the process of removing I got it working except the turning cancellation bits. the adds claim that the cheap switches are cheap poor quality. but I would not be running extra current through the original wiring.

  3. #3
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    2,023
    Total Downloaded
    0
    Thanks for the reply, Dave.

    whitehillbilly64

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!