Thread: Stage one front axle housing

Originally Posted by 123rover50

........
Captainslows idea with the hubcaps sounds the go. Thanks Pete.
I will keep looking.
Keith

I think the change of the stub shaft from 242520 (88) or 608023 (109) to AEU1827 from October 1980 will look the same as AEU1828 used in the Stage 1 when seen from the hub. So while a nut on the end means it is not Stage 1, absence of the nut does not mean it is.

John

Thanks John.
So I find one with the circlip first, then check through the oil filler hole.
I havnt had any thing to do with stage ones up till now.
Keith

Originally Posted by Lotz-A-Landies

Hi Keith

No I no longer have the complete car and in fact, as you'll see (above) I have already removed the swivels and CVs to use on Gog my SIIB so only have the actual axle housing (inner halfshafts and diff centre) left.

But if that's all you wanted happy to bring it up as ballast on the trailer, money not required.

Ok I have the hubcap off and its a circlip but I cant see enough through the oil hole to tell.
Now the outer circumference of the flange has a groove machined in it.
Did the swivel balls you took off this axle have a groove.?
If so that might be a way to tell Stage one balls from the others without dismantelling.

Keith