Bought for parts

Well the tray has been trial fitted and everything made up to fit did a few test drives in it and everything worked first go was the first time since I have owned it That have driven it

now it is ready for removal for painting and cleaning getting so close to rego
https://uploads.tapatalk-cdn.com/202...79ef0647dd.jpg
https://uploads.tapatalk-cdn.com/202...c07bc08b82.jpg

What a great looking Series 3 109. well done!

Quote:

---

Originally Posted by Dgd69

Few more jobs done over last few days fitted side mirrors with longer arm on passenger side
Also fitted new seat belts
I am definitely not a vehicle upholster and don’t like doing it but had a go welded up we’re it had been cut for a radio and filled all the crack it turn out good enough for a landy so dash is half done
waiting on a choke cable then will finish it off
Big shout to paddocks spares thou sent wrong floor mats said for me to keep ones I have and they sending correct ones free of charge
https://uploads.tapatalk-cdn.com/202...be79376415.jpg
https://uploads.tapatalk-cdn.com/202...7c9277a9a3.jpg
https://uploads.tapatalk-cdn.com/202...318af397df.jpg
https://uploads.tapatalk-cdn.com/202...1cf4fe788a.jpg
https://uploads.tapatalk-cdn.com/202...1d9a3cf78a.jpg
https://uploads.tapatalk-cdn.com/202...9bc5cedfdc.jpg
https://uploads.tapatalk-cdn.com/202...e3c0d537b9.jpg

---

Hello from Brisbane - Perth for a couple of days.

I sent a PM earlier today to ask a question about the dash top restoration from this post (page #15). Got an automatic message back saying that your inbox was full and wouldn’t take further in-messages until something is cleared.

Could you call me on 0419715234 and I’ll ask about the dash and a couple of other topics on your restoration direct.

Cheers,

Neil

Quote:

---

Originally Posted by S3ute

Hello from Brisbane - Perth for a couple of days.

I sent a PM earlier today to ask a question about the dash top restoration from this post (page #15). Got an automatic message back saying that your inbox was full and wouldn’t take further in-messages until something is cleared.

Could you call me on 0419715234 and I’ll ask about the dash and a couple of other topics on your restoration direct.

Cheers,

Neil

---

Sent you pm will call next week as away with work

Thanks

Quote:

---

Originally Posted by Dgd69

Sent you pm will call next week as away with work

Thanks

---

Thanks.

Had to lift the tray bit higher as on articulation it touched ,
steering relay decided to leak so that fixed took it for good long drive around only fault slight leak from selector shafts that will be a next time job as have yo pull floor up again but overall very happy hopefully rego next month as works been busy https://uploads.tapatalk-cdn.com/202...15484944cc.jpghttps://uploads.tapatalk-cdn.com/202...d51491dc12.jpg
https://uploads.tapatalk-cdn.com/202...7eefb7c143.jpg

Attachment 180211Well it’s finished the 12 month clean up that took 6 years.Everest behaved himself during inspection and passed first go , it has been good driving it around now to create different memories with Everest and using it for what it was made to do thanks everyone for there help and advice during this build I am also can’t wait to get back into my series 2 swb

Well when you think your finished you come across a reasonably priced tub from local car club member
needs a little work but fairly straight but it will finally be back to original I still have copy’s of the original tyre pressure markings for on top of wheel arches just means the swb I currently building once again will need to wait

Quote:

---

Originally Posted by Dgd69

Well when you think your finished you come across a reasonably priced tub from local car club member
needs a little work but fairly straight but it will finally be back to original I still have copy’s of the original tyre pressure markings for on top of wheel arches just means the swb I currently building once again will need to wait

---

A practice of the ADF & other users normally but other owners could do the same.

Galvanised trim removed ready to get regalvanised then to start on the dents on tub