Results 1 to 5 of 5

Thread: Can I swap Selectro F W Hubs from a SIIA to a SIII?

  1. 30th June 2008, 03:38 PM #1
    Brisso57's Avatar
    Brisso57
    Brisso57 is offline Fossicker Subscriber
    Join Date
    Apr 2008
    Location
    Brisbane, western suburbs
    Posts
    83
    Total Downloaded
    0

    Can I swap Selectro F W Hubs from a SIIA to a SIII?

    The Selectro FW hubs are in good working order (from a LWB SIIA).
    Is it possible?
    Is it a straight bolt-on job, to fit them to my SIII LWB?

    Thanks

    Doug
    ---------------------------------------------
    "Nothing succeeds like a budgie without a beak."
    Reply With Quote Reply With Quote
  2. 30th June 2008, 04:15 PM #2
    stage1slave
    stage1slave is offline Master
    Join Date
    Jul 2006
    Location
    Sunshine Coast
    Posts
    374
    Total Downloaded
    0
    Depends on what year model and wheelbase. S3 lwb had fine splines and the 11a and swb had course.....I think... It may be possible though, to pull the hubs to bits and just swap the internal bit that fits over the spline as I have just done. If you've got something to swap that is.
    cheers
    ER
    Reply With Quote Reply With Quote
  3. 30th June 2008, 04:28 PM #3
    Brisso57's Avatar
    Brisso57
    Brisso57 is offline Fossicker Subscriber
    Join Date
    Apr 2008
    Location
    Brisbane, western suburbs
    Posts
    83
    Total Downloaded
    0
    Hmmm. I guess I'll have to wait until I get them both disassembled.

    The SIII is a 1976 model.

    Thanks.

    Doug
    ---------------------------------------------
    "Nothing succeeds like a budgie without a beak."
    Reply With Quote Reply With Quote
  4. 30th June 2008, 04:45 PM #4
    stage1slave
    stage1slave is offline Master
    Join Date
    Jul 2006
    Location
    Sunshine Coast
    Posts
    374
    Total Downloaded
    0
    Yep, if they are different, pull them both apart. just undo the circlip that holds the spline bit, and if they are serviceable, just swap them over and reassemble. Job done.
    cheers
    ER
    Reply With Quote Reply With Quote
  5. 30th June 2008, 04:59 PM #5
    JDNSW's Avatar
    JDNSW
    JDNSW is online now RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,521
    Total Downloaded
    0
    All S2a except a few very late lwbs have ten spline drive flanges (and hence free wheel hubs). All lwb Series 3 have 24 spline drive flanges.

    Obviously, they almost certainly won't swap - BUT - the axles are completely interchangeable, and there is a reasonable chance that either of the Landrovers do not have the original front axle (or components) and they may actually swap.

    Only way to be sure is to check how many splines there are on both.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
« 10" or 11"... baby! | New Spline 109 Prop Shaft »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!