Thread: Replacment footwell

G'day All, Footwells are made of steel, and they are available from the usual suspects in Melbourne. The footwells are attached to the b/head by spot welds hope that helps cheers Dennis
PS Some people just use an angle grinder and cut out the old and weld in the new using a mig/welder, so I suppose it depends on how original you want to keep it looking, and it would be easier to remove the b/head off the chassis too.

Thanks for that just what I needed to know. I intend on getting it relicenced as its in fairly good nick otherwise and will need to go over the pits so not sure if a patch would let it pass.

Have you got contact details for TUS ? I'm in wa and no joy with the google.

Thanks

Originally Posted by Randylandy

Have you got contact details for TUS ? I'm in wa and no joy with the google.

Thanks

__________________________________________________ ______________

Check with John E on the sight he has or is buying ? a set fro Melbourne for his Ser 3 abut $60 each plus postage and the Melb mob is pretty cheap with freight rates Quoted me $38 for rear cross member Melb. to Brisbane.

Hodgo

Originally Posted by Randylandy

Have you got contact details for TUS ? I'm in wa and no joy with the google.

Thanks

Four Wheel Drives in Box Hill, Melbourne. Probably also available from any other Landrover specialists (not dealers).

John

Just removed the old foot well today was pretty easy just removed the guard and drilled out the old spot welds and poped it out. Just need to clean up some surface rust and wait for the new one.

G'Day Randylandy

Have you ordered the footwells?

If you have could you provide the details and price? I have to fit a couple myself very soon.

Cheers Andy.

Yeah no problem. Not ordered it yet just trying to track some down now. Will let you know.