Printable View
Yeah i was just thinking it might be easier to put a photo of mine up.... give me an hour or so.
Ok well my dash/panel lights ive connected to the headlight switch, come on and stay on parkers through to headlight and high beam.
Not going to reinstall/connect the heater unit. Dont know if it works, not worth it in my eyes.
Re hazards: I was presuming that these would be required for a roadworthy and therefore current registration???
Pics to come.
Thanks for your help, Josh
Don't know about the hazards, but as far as I know, the heater has to be in working order to get registered. Something about having the ability to demistify the front windows. I could be wrong, but that's what I heard.Quote:
Originally Posted by keeffe88
:
If that panel light toggle switch is still doing nothing, it could be handy to use it in the future for spotties or what not :)
Here is a start josh
Land Rover Stage 1 V8 - Manuals
You can get the series 3 manual from there as well as others
I will pic some pic's up once I put the young fella to bed and get down to the shed
Adam
Dayam, I aaaalmost wish I hadn't forked out for a brand new SIII workshop manual :p
Ok let me see if I can remember what I did last night
https://www.aulro.com/afvb/images/im...009/10/800.jpg
Front
https://www.aulro.com/afvb/images/im...009/10/801.jpg
Back
https://www.aulro.com/afvb/images/im...009/10/802.jpg
Light and dash light switch
https://www.aulro.com/afvb/images/im...009/10/803.jpg
Ignition switch
https://www.aulro.com/afvb/images/im...009/10/804.jpg
Common wire for temp and fuel gauge
https://www.aulro.com/afvb/images/im...009/10/805.jpg
Fuel gauge wire
https://www.aulro.com/afvb/images/im...009/10/806.jpg
Wiper/washer switch wires
https://www.aulro.com/afvb/images/im...009/10/807.jpg
Voltage reg wires and in the back ground is the hih beam and oil warning lights
https://www.aulro.com/afvb/images/im...009/10/808.jpg
Indicator and charge light
https://www.aulro.com/afvb/images/im...009/10/809.jpg
Fan switch
If you need anything else let me know my dash will be apart for a while
Adam
The blanked out push button is for the window washer if you have one its shown in agrojnr,s 1st pic, is yours civy or mil s111 as the mil ones only have single speed wipers so switch maybe working correctly. Not sure about QL but you dont need hazards for rego in NSW unless they were fitted as original equipment
In the 2nd pic you can see the back of my wiper switch, mine is a 2stage switch and also the window washer.
I had a look today and hazards were an op extra which required an extra loom.
To pass pits here in wa you need to have 2 stage wipers and window washers plus a heater to de-mist the windscreen
Adam
I expect that depends on the date of manufacture - most Series 3 in Australia were supplied with single speed wipers, and I would be very surprised if they were required to be retrofitted.Quote:
Originally Posted by agrojnr
On the other hand, I think washers will be required to be retrofitted, and possibly the heater as well, although I think this was fitted to all S3s in Australia except perhaps the very earliest, as it was a requirement by then.
(My 1970 2a had to be retrofitted with washers for rego in Victoria in 1992, but a heater was not required, nor was it required for rego in NSW in 1994. In 1966 I had to fit a LH wiper to my 2a to transfer the rego from NT to NSW.)
John
Not so sure about that ;) I got my '63 Bedford truck licenced with none of the above present. :)Quote:
Originally Posted by agrojnr
Cheers Charlie
I spoke to the engineer last week and the 2 speed wipers must be installed and I never told him what year the landy was (I was asking about the heater mostly)
I have the info downloaded off the dpi web site and it states 2 speed wipers???
Maybe its only for cars with 5 seats or more
Adam