Results 1 to 6 of 6

Thread: Intermediate Gear Bearings

  1. 11th April 2014, 10:32 AM #1
    B.S.F.'s Avatar
    B.S.F.
    B.S.F. is offline Wizard
    Join Date
    Jul 2009
    Location
    S.E.Qld
    Posts
    1,401
    Total Downloaded
    0

    Intermediate Gear Bearings

    While looking through my stuff I found these. They appear to fit a shaft about 1 and 5/8 ''. I've only got S1 and 2 shafts which are smaller. Any idea what they fit ? They appear to be in useable condition. .W.
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  2. 11th April 2014, 05:18 PM #2
    gromit's Avatar
    gromit
    gromit is offline ForumSage Supporter
    Join Date
    Jan 1970
    Location
    Narre Warren South
    Posts
    6,796
    Total Downloaded
    0
    Quote Originally Posted by B.S.F.Nut View Post
    While looking through my stuff I found these. They appear to fit a shaft about 1 and 5/8 ''. I've only got S1 and 2 shafts which are smaller. Any idea what they fit ? They appear to be in useable condition. .W.
    Series 3 have a bigger diameter intermediate shaft.
    Usually they are plastic caged so I guess yours are older and/or OEM ?

    Colin
    '56 Series 1 with homemade welder
    '65 Series IIa Dormobile
    '70 SIIa GS
    '76 SIII 88" (Isuzu C240)
    '81 SIII FFR
    '95 Defender Tanami
    Motorcycles :-
    Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C, Suzuki SV650
    Reply With Quote Reply With Quote
  3. 11th April 2014, 05:37 PM #3
    Dinty's Avatar
    Dinty
    Dinty is offline TopicToaster
    Join Date
    Jan 1970
    Location
    Cessnock NSW
    Posts
    4,990
    Total Downloaded
    0
    Series 2A & S3 have the larger diameter intermediate shaft, cheers Dennis
    Reply With Quote Reply With Quote
  4. 11th April 2014, 06:47 PM #4
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,511
    Total Downloaded
    0
    The change was during Series 2A production between chassis suffix A and B. (But since the boxes are interchangeable from 1950 to end Series 3 production, check what you actually have!)

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  5. 11th April 2014, 06:51 PM #5
    B.S.F.'s Avatar
    B.S.F.
    B.S.F. is offline Wizard
    Join Date
    Jul 2009
    Location
    S.E.Qld
    Posts
    1,401
    Total Downloaded
    0
    Thank you for your replies. I'd better hang on to them then. One never knows, do one? .W.
    Reply With Quote Reply With Quote
  6. 12th April 2014, 09:02 AM #6
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    they are later 2A and 3 bearings, later three bearings had a plastic cage,

    pack em in grease, put em in a bit of PVC pipe and cap both ends with a label affixed.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
« axles for series landies | Setup for an expedition Series III »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!