Toe in or toe out

Quote:

---

Originally Posted by timax

My Defender is running toe in. How much i have no idea. Its fine under brakes , well for a Defender at least.

---

Ok, that's unusual, as goingbush said the factory spec is 0-2mm toe out.
Most have found the things are yukky with toe in.

I used to run at least 2mm out on my old 130. It drove dead straight and was never an issue under brakes. I haven't checked the Disco since it became mine.
Probably should. [bigwhistle]

Ok , out with the tent pole toe measuring stick it is then.
Thanks gents.

Quote:

---

Originally Posted by timax

Ok , out with the tent pole toe measuring stick it is then.
Thanks gents.

---

Or a parallel string line down both sides, measure off your hub centerline to get it parallel.
IIRC milk crates were about the right height to hold a bar at each end.