Seat belts

**JDNSW** · 12th December 2022, 07:45 PM

Originally Posted by Tins

Out of interest John, your reel is located in the same place as the one on my SIII. Is there any form of strengthening where it is mounted?

Not obvious from this side, but the back of the bulkhead panel is doubled with 3mm alloy plate - my 2a started life as a FFR and it has a large number of holes in it, so changing from a soft top to a cab ute meant I had to block the holes somehow to keep the water and the dust out. This means that it is far more strongly reinforced than the 10cm square 1.5mm plate spot welded in place on the S3 I pinched the bits (and the cab and doors) from.

**p38arover** · 12th December 2022, 08:51 PM

This fits S2/S3:

Left Hand Lower Seatbelt Bracket - KLR Automotive

You might need this:

Seatbelt Inertia Reel Bracket, 4x4 Perentie - KLR Automotive

Do you need these (they have LH and RH)?

Seatbelt Tiebar, Righthand, 4x4 Perentie - KLR Automotive

**Tins** · 12th December 2022, 08:58 PM

Originally Posted by p38arover

Do you need these (they have LH and RH)?

Seatbelt Tiebar, Righthand, 4x4 Perentie - KLR Automotive

What's that one do, tie back to the chassis??

**JDNSW** · 13th December 2022, 06:15 AM

By the look of it, yes.

**p38arover** · 13th December 2022, 07:51 AM

Originally Posted by Tins

What's that one do, tie back to the chassis??

I’ll ask today when I’m at KLR.

**Tins** · 13th December 2022, 08:43 AM

Originally Posted by p38arover

I’ll ask today when I’m at KLR.

Thanks Ron. My SIII has nothing like that.

**p38arover** · 13th December 2022, 10:54 PM

I forgot to ask...

But I did take some pics of some parts they have for Perenties and which may suit yours.

Bracket for retractable seat belt (not on their website. I forgot to jot down the part no. - I'll ask.)

Seatbelt mounts (8 of 8).jpg

Seatbelt mounts (1 of 8).jpg

It bolts on here behind the seats:

Seatbelt mounts (4 of 8).jpg

This is a different retractable belt mount (it's on the website, I referenced it earlier).

Seatbelt mounts (2 of 8).jpg

This is the lower seatbelt bracket (see link in my earlier post).

Seatbelt mounts (5 of 8).jpg

Seatbelt mounts (3 of 8).jpg

This is the seatbelt KLR use (this is the LH one, part no. BTR6561. I didn't get the no. of the RH item. You'd need the seat belt stalks. Not on their website. I'll try to find out their part no.)

Seatbelt mounts (6 of 8).jpg

Seatbelt mounts (7 of 8).jpg

BTR6561 (1 of 1).jpg

**Tins** · 14th December 2022, 10:39 AM

Originally Posted by p38arover

I forgot to ask...

That's fine. I have symptoms of 'old timers' too.

**p38arover** · 14th December 2022, 06:23 PM

I took some pix of the seatbelt install in a Stage 1 Station Wagon today. I’ll post them later tonight.

Some of that stuff I posted earlier probably isn’t suitable.

**p38arover** · 14th December 2022, 09:12 PM

Pix as promised.

SeatBelts (1 of 3).jpg

SeatBelts (2 of 3).jpg

SeatBelts (3 of 3).jpg

Thread: Seat belts

Thread Tools

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions