Reply With QuoteDoesn't that go through the holes at the bottom of the lever, with the rodto the brake through the hole in it, and also keeps it in place?
(I'm in bed using the laptop and don't have access to my manuals without getting out of bed)
Fossicker
SupporterHi,
I am up to restoring the handbrake and I can see this pin (part number 543281) and I can't tell what it is for. I am sure it might have been attached to something when I disassembled the car but cannot find any reference.
Any help would be appreciated.
Thanks,
Chris
IMG_6550.jpeg
RoverLord
Doesn't that go through the holes at the bottom of the lever, with the rodto the brake through the hole in it, and also keeps it in place?
(I'm in bed using the laptop and don't have access to my manuals without getting out of bed)
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
RoverLord
pretty sure thats the one for the linkage rod
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Master
SupporterDefinitely for the linkage rod that connects the lever to the 90 degree crank, the crank which fits on a pin on the chassis has two small rods one from the lever the other into the brake drum backing plate.
Fossicker
SupporterThank you for the advice - I will look to see how it should all link.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks