Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: ‘Nibbles’ the Jaguar powered 1966 Series 2A

  1. #1
    Join Date
    Mar 2026
    Location
    Melb
    Posts
    13
    Total Downloaded
    0

    ‘Nibbles’ the Jaguar powered 1966 Series 2A

    Bit of a long time lurker on here, but not posted much but I thought I would start a project and make a little build thread – keeps me honest and working haha. I am currently completing a concourse restoration of a 1976 RRC and on the way got a little bit bored with the monotony and just wanted something to drive.
    Attached Images Attached Images

  2. #2
    Join Date
    Mar 2026
    Location
    Melb
    Posts
    13
    Total Downloaded
    0
    Enter about two weeks ago, I found a very reasonably priced Series 2A with some odd modifications on FB marketplace a couple hours from me for 1800 aussie dollarydoos and hitched up a U-Haul flat top and made my way down to the location to winch her up.
    Attached Images Attached Images

  3. #3
    Join Date
    Mar 2026
    Location
    Melb
    Posts
    13
    Total Downloaded
    0
    The bloke for once was not pulling my leg and the car had almost no rust outside of the bulkhead, all the outriggers and cross members are solid and complete. A Holden redtop engine sits in leiu of the original and as always “she ran when parked”.
    Attached Images Attached Images

  4. #4
    Join Date
    Mar 2026
    Location
    Melb
    Posts
    13
    Total Downloaded
    0
    The story of “Land Nibbler” or as I will refer to her as “Nibbles” is that she was sold with a property at least twice and in the end two blokes bought it in quick succession (a couple months apart) before me. Now this is usually a good indicator that everything is not 100% with the engine or gearbox (in a case of a mostly rust-free car). My suspicions were heightened with the new oil filter, hoses, dizzy and spark plugs/wires. Someone tried recently to get it running and I suspect wasn’t happy with the result. None the less she winched fine especially with the non-working brakes and permanently depressed clutch. Nothing that 25$ discount Bunnings ratchets can’t hold in place.
    Attached Images Attached Images

  5. #5
    Join Date
    Mar 2026
    Location
    Melb
    Posts
    13
    Total Downloaded
    0
    Now the curious part about the car is that I am still not 100% sure on the history, but I am trying to make some sense of it. It appears to have been originally delivered as a green vehicle and then painted OD green some stage all before it became a farm truck. The chassis is a standard civvie chassis but there are heavy duty axles present. On the fenders, there is the name “Land Nibbler” in military stencil, that name was painted in white on the original green and then again on the army green twice. I am told however without being a military chassis it cannot be considered a military vehicle and may be a re-body (although from what I am looking at I am not sure). There is also a military dashboard and radiator surrounds, the original latch bonnet latch was military as is the tool holder; although curiously only on one side. The farm I purchased it from was also very close proximity to a RAAF base so no idea.
    Attached Images Attached Images

  6. #6
    Join Date
    Mar 2026
    Location
    Melb
    Posts
    13
    Total Downloaded
    0
    One trip to the carwash later and my suspicions about the origin was heightened again, the gearbox appears to have been rebuilt and some of the black components have been painted OD green. The rear diff is white and there two stripes on the LHS of the rear axle which I am told is military.

    The data plaque reads V.L.2AZ-204 – I translate this to Vehicle. Land Rover. 2A Z? – 204 (something)
    Attached Images Attached Images

  7. #7
    Join Date
    Mar 2026
    Location
    Melb
    Posts
    13
    Total Downloaded
    0
    This brings up a bit of a conundrum, “Nibbles” despite being a SWB is not worth a whole bunch without a running engine, having the original engine been swapped out and the chassis cross member suffering a bit of massaging.

    Landy engines in good condition are not impossible to find, but overall they leave a bit to be desired and can get quite expensive to get going again if they are tired which most of them are (ask me how I know)

    I wasn’t sure what entirely to do – the most sensible thing being to rebuild the Holden or find one in running condition (both fairly simple options)


    However there is always a third option – that is to be a complete idiot.
    Attached Images Attached Images

  8. #8
    Join Date
    Mar 2026
    Location
    Melb
    Posts
    13
    Total Downloaded
    0
    Trolling the old Gumtree yielded some silly but promising results including things like Barra’s and TDI’s in the end why not go back to another period correct problem….



    The first owner clearly got sick with the British engineering and installed some Australian reliability, but in my quest for a simple car to go get coffee in and drive to the beach - why settle for a simple and not leaking; when I could instead re-install something even more complex and leaky.

  9. #9
    Join Date
    Mar 2026
    Location
    Melb
    Posts
    13
    Total Downloaded
    0
    Enter the Jaguar XK engine.

    Now in the case of Goldilocks and the 4 engines
    - the 4.2 was a wee bit too powerful for the little axles
    - the 3.8 was a wee bit too boring and clapped out (plus EFI nonsense)
    - the 3.4 was a wee bit too expensive and wanted for the E’s and XK’s
    - But the 2.4 fits just right (+/- angle grinder)
    Attached Images Attached Images

  10. #10
    Join Date
    Mar 2026
    Location
    Melb
    Posts
    13
    Total Downloaded
    0
    As we had it, on Gumtree a perfect candidate, an extremely nice fellow was getting out of restoring Mk2 Jaguars and selling up his collection of parts under the guise that I take the whole lot for 1200 monopoly money.
    ^This included a freshly rebuilt 2.4L XK engine with a rebuilt Moss 4 speed gearbox, as well as a spare auto box, headers and props for both and a bunch of separate accessories and parts he had collected along the way.

    Naturally no one really wanted the 2.4L (except me) so it had sat for 4-5 months with no inquiries except lowball and scams + people asking to seperate the manual gearbox for conversions.
    Attached Images Attached Images

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!