Rotating pintle spare parts?

[Tomo]

Hi All,
I have an old rotating pintle I am restoring. I need a new pin for the locking lever. You can see in the photos where I have been trying to drift it through.

Anyone know where I can get one from? would also like to replace the retaining split pins on the chain

[Dinty]

These people should be able to help you
Pintles - Dixon-Bate
I'm sure that is the company that I purchased many small parts from about 8 years ago, but be prepared for the price very exxy, but if you want it to work, you have to be prepared to shell out the $$$'s, cheers Dennis

[Wallaby Ted]

I bought a new pin for mine from John Richards surplus in the UK as well as a couple of other bits for the Pintle hook.

Military trailer hitch & leg safety pin 3.5 inch | Trailer Parts | John Richards Surplus | John Richards Surplus - A Name You Can Trust!

Richard

[Tomo]

Thanks,
I have emailed them and they have asked for some clarification as to exactly which parts I need.

These people should be able to help you
Pintles - Dixon-Bate
I'm sure that is the company that I purchased many small parts from about 8 years ago, but be prepared for the price very exxy, but if you want it to work, you have to be prepared to shell out the $$$'s, cheers Dennis

[Tomo]

Thanks Ted
Interesting website
Did not see the part I am looking for on there, however saw some other parts I would like....

I bought a new pin for mine from John Richards surplus in the UK as well as a couple of other bits for the Pintle hook.

Military trailer hitch & leg safety pin 3.5 inch | Trailer Parts | John Richards Surplus | John Richards Surplus - A Name You Can Trust!

Richard

[dandlandyman]

.....Browsing is a dangerous passtime.....

[Wallaby Ted]

Thanks Ted
Interesting website
Did not see the part I am looking for on there, however saw some other parts I would like....

Was it the bottom locking pin you were after?

Part number for that was stc3431 I got mine from fleabay

stc3431 | eBay


Richard

[Wallaby Ted]

Don't know if you have these bit I found them useful when I was trying to buy parts for the Pintle Hook.


Richard

[Tomo]

Thanks Richard,
That is fantastic!
I need FV32176 - pin, amongst other things
This will help greatly in my correspondence with Dixon Bate.....

Don't know if you have these bit I found them useful when I was trying to buy parts for the Pintle Hook.


Richard

[Wallaby Ted]

Hi Tomo,

Never had to buy that one when I was doing the Pintle hook so good luck. I think you will find that these are Australian Military part numbers so you may need to convert them.

Worst case you can send them the digram with the part you are after.


Richard