Hi all
I am after a 12V wire to power a relay (in the engine bay) only when the ignition is on. Are there easy to access wires in the harnesses either under dash or in engine bay (preferred)?
Which harness and wire colour please?
Does anyone have any photos?
thanks
Rob
Swaggie
Piggy-back fuse holders work well especially if the current draw is only going to be low so as to not add excessive load to the wiring. EG The wiring for an existing 5A fuse might not be heavy enough to carry another 5A continuously whereas the wire for a 20A fuse will be.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Graeme is spot on... Piggy back into the engine bay fuse box.
Wizard
SupporterJaycar sells them:
Double Mini Blade Fuse Socket Wire Tap - Jaycar Electronics
2014 SDV6 HSE - LLAMS, Tuff Ant Tree Sliders, Tuff Ant 18" rims, Nitto Ridge Grappler tyres 265/65 R18, Custom Lipo4 battery, Custom Drawer storage system https://www.box.com/s/jem0ilac3cner2mexq64
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks