Results 1 to 2 of 2

Thread: P0101 fault code 2012 2.2l

  1. #1
    Ninety Guest

    P0101 fault code 2012 2.2l

    Hi all,

    Driving along a couple of weeks ago i was entering the freeway (80km/h) and gave the 90 a poke of the throttle to merge with traffic and the malfunction indication light came on the dash and the car went into limp mode.

    I managed to get to my destination and plug in my nancom which gave the following reading.

    CODE: P0101
    Mass or volume air flow - circuit range/performance.
    (INTERMITTENT)

    I reset the code and drove home a different route (60km/h max speed limit) and the light stayed off but the defender didnt feel 100%.

    I did some searching online and checked all the intercooler hoses (BAS silicone hoses) and they were all clamped tight with no rub throughs.

    I bought some MAF sensor cleaner and gave the MAF sensor a good clean. That seemed to make the defender feel 100% again but the malfunction light came on again and this time at 50km/h.

    I decided to change the fuel and air filters but this didn't help in anyway.

    Im thinking the intercooler may have a hairline crack in it somewhere? I havnt been off road in a long time though so it seems odd.

    Basic servicing of the 90 and changing a hose or two is the extent of my mechanical knowledge so any help is appreciated.

    Cheers

  2. #2
    Join Date
    Mar 2007
    Location
    Great Southern Land
    Posts
    1,076
    Total Downloaded
    0
    See my response in your other post
    1963 S2A 88 113-300 6 RAR, VTF, Vietnam.
    1989 Perentie FFR 49-290 2 Sig Regt.
    1989 Perentie FFR 49-390 1 MP BN.
    1990 Perentie GS 50-087 5 RAR.
    2013 Defender 110 Wagon, 'Snowy'.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!