1954 Royal Review 47160049

Thanks Digger.
John (the writer) looks the part in the uniform ay.

Keith

So do you:D

Keith,

Hello from Africa - sitting in the departure lounge at Johannesburg airport and picked up a copy of LROI on the news stand.

Great article on your truck. Came across really well.

Cheers,

Neil

HI Keith , The LRO mag with the story about your Royal is in news agency now. I picked up a copy this morning & just about to read it.
Wayne

Thanks Wayne.
We are going in to town shortly, I will pick one up.
Keith

I went into my Newsagent yesterday and there wasn't any. :(

But today I looked through the window and there it was. :banana:

And I have already read pages 114 through to 118. :D
.

Well I guess we are allowed them.
I had decided to make a new light board to hang on the step. While in autobarn I thought a couple of LED combined indicator, stop, and tail would work fine, so bought them.
Went to fit them up.
No go.
Of course I know diodes only work one way but I have used singles before by swapping the polarity of the wires around. That works on singles but not with a cluster that has a common earth.
Why wont it work? HRH is 1954 and wired positive earth:o
I dont want to change that so its back to the store for a couple of bulb clusters.

Keith

Glen (Zulu Delta 534) had a similar problem when he put LEDs on his 80", I think he came up with a solution in the end.

Cheers, Mick.

I couldn't get LED's to work on Landy or the MG & i've made them neg to earth.

If you are handy with a soldering iron and if you can get into the insides of the light, all that needs to be done is lift each LED and resolder the LED back in, the opposite way around.