Thread: No Power at Start Up

Originally Posted by Yorkie

baz, where's the best deal on maf's to be found at the mo?

cheers
liam

Give Peter a call

Baz.

Originally Posted by Redback

OK MAF fixed, numbers are good at 60 to 70 at idle and 550+ at 3000rpm

Baz.

Mine says 4.4?

all the time....

I have a BAS boost box if that makes any difference?

ur maf is not working at all benny,,, if u unplug it will still read 4.4,

and i mite have a brand new one lying around for you,,

Originally Posted by Benny_IIA

Mine says 4.4?

all the time....

I have a BAS boost box if that makes any difference?

Sure your in the right spot, 4.4 doesn't sound right, as for the boost box, can't see that making a difference as it only affects manifold pressure.

Tombie2 might know better though.

OK going into the Nanocom, TD5 engine, go fuelling scroll to air flow, reading should be as above in my post.

All the instructions for this are on page 9 of the Nanocom user manual.

Baz

4.4kpm? is what it reads for a default fuel map, mine did it wen i had unpluged the maf,

and if sumhow its failed compleatly it will read 4.4

and i do agree on the MAP and the box,