Results 1 to 3 of 3

Thread: spider bypass (simple method)

  1. 8th April 2010, 02:59 PM #1
    Bazzle218's Avatar
    Bazzle218
    Bazzle218 is offline Master Subscriber
    Join Date
    Nov 2007
    Location
    Townsville Nth Qld
    Posts
    742
    Total Downloaded
    0

    spider bypass (simple method)

    Recently the 1996 300 TDI Auto had a spider moment, Parked at a shop and locked it with the fob on returned opened it and plenty of lights on dash but no go. I returned 3 hrs later to tow it home and it started. Plenty of forums on this problem most related to stripping the dash and or bypassing the spider. I recall someone had a method re running a wire to the starter and fuel solenoid, to bypass the spider. Could some one pass on this method so i can set it up in preparation for next time it happens? . Hate for my daughter to be stuck somewhere

    The neutral start switch works fine so that was not the problem, did not wind over at all no clicking of relays ect, hAs not missed a beat again
    Last edited by Bazzle218; 8th April 2010 at 03:01 PM. Reason: further info
    Reply With Quote Reply With Quote
  2. 8th April 2010, 06:49 PM #2
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,532
    Total Downloaded
    0
    to easy....

    rig up a spade terminal connector with an aligator clip.

    this goes from the battery to the fuel cut off solenoid on the fuel pump, powering this up makes the engine live and ready to start if its a manual you can roll start it from here.

    For the starter motor you can rig a similar bypass but all you really need to do is short the primary positive feed (the big fat wire from the battery)on the solenoid to the signal line on the solenoid (the little thin wire that comes from the ignition barrel

    Theres a couple more advanced versions that Ive seen rigged up but thats the "get you out of trouble" version
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 8th April 2010, 07:06 PM #3
    350RRC's Avatar
    350RRC
    350RRC is offline ForumSage Silver Subscriber
    Join Date
    Mar 2008
    Location
    Bellarine Peninsula, Brackistan
    Posts
    5,540
    Total Downloaded
    0
    And here's the way to fix it properly when you get time:

    The Definitive Alarm Spider Post - LR4x4 - The Land Rover Forum

    cheers, DL
    Reply With Quote Reply With Quote
« Head reassembly TD5 defender | 3.5 Efi High Idle »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!