Results 1 to 8 of 8

Thread: ARB Locker replacement bolts?

  1. 17th April 2010, 07:52 PM #1
    isuzurover's Avatar
    isuzurover
    isuzurover is offline Swaggie
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0

    ARB Locker replacement bolts?

    I am reassembling an ARB RD03/RD56 (3-piece ARB locker).

    Can anyone see a reason why I cannot use socket head cap screws (class 12.9) to replace the small M8 bolts on the non crownwheel side? It looks like they will clear...?

    Can someone with an ARB manual give me the torque setting for these bolts?

    Cheers,

    Ben.
    Reply With Quote Reply With Quote
  2. 18th April 2010, 09:02 AM #2
    TimNZ's Avatar
    TimNZ
    TimNZ is offline Wizard
    Join Date
    Mar 2008
    Location
    Perth, WA
    Posts
    1,947
    Total Downloaded
    0
    Hi Ben,
    Devon 4x4 have done a step by step guide, you can download it here:

    Devon 4x4 Off Road - Document Details | RD56 Installation Guide

    Cheers,

    Tim
    Reply With Quote Reply With Quote
  3. 18th April 2010, 09:29 AM #3
    isuzurover's Avatar
    isuzurover
    isuzurover is offline Swaggie
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Thanks Tim,

    however I am talking about these bolts

    which aren't mentioned in any of the install guides, as you normally don't have to touch them.
    Reply With Quote Reply With Quote
  4. 18th April 2010, 09:46 AM #4
    Tank's Avatar
    Tank
    Tank is offline AT REST
    Join Date
    Jan 1970
    Location
    Moruya Heads/Sth. Coast, NSW
    Posts
    6,532
    Total Downloaded
    0
    Most Workshop manuals (Factory) usually have an Appendix with Bolt Torque values by size and grade of bolt, I'm sure I have the info somewhere, but I'm on the way out, I'll have a look tonight when I get back, Regards Frank.
    Reply With Quote Reply With Quote
  5. 18th April 2010, 09:53 AM #5
    isuzurover's Avatar
    isuzurover
    isuzurover is offline Swaggie
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by Tank View Post
    Most Workshop manuals (Factory) usually have an Appendix with Bolt Torque values by size and grade of bolt, I'm sure I have the info somewhere, but I'm on the way out, I'll have a look tonight when I get back, Regards Frank.
    Thanks Tank, however I have found that ~40Nm for an M8, class 12.9 bolt. Will just have to suck it and see if they clear.
    Reply With Quote Reply With Quote
  6. 18th April 2010, 06:22 PM #6
    Tank's Avatar
    Tank
    Tank is offline AT REST
    Join Date
    Jan 1970
    Location
    Moruya Heads/Sth. Coast, NSW
    Posts
    6,532
    Total Downloaded
    0
    S'pose you could dummy fit the centre and check for clearance, Regards Frank.
    Reply With Quote Reply With Quote
  7. 18th April 2010, 07:20 PM #7
    Bush65
    Bush65 is offline YarnMaster
    Join Date
    Jan 1970
    Location
    'The Creek' Captain Creek, QLD
    Posts
    3,724
    Total Downloaded
    0
    I only have ARB installation guides they don't give the torque value for those bolts.

    BTW the ARB part numbers for an RD03 are:
    200205 for the 6 bolts
    150401 for the 6 tab washers

    The bolts can be re-used but you need new tab washers.
    Reply With Quote Reply With Quote
  8. 18th April 2010, 10:38 PM #8
    isuzurover's Avatar
    isuzurover
    isuzurover is offline Swaggie
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by Bush65 View Post
    I only have ARB installation guides they don't give the torque value for those bolts.

    BTW the ARB part numbers for an RD03 are:
    200205 for the 6 bolts
    150401 for the 6 tab washers

    The bolts can be re-used but you need new tab washers.
    Thanks John. The official ARB literature says bolts cannot be reused:
    www.arb.com.au/resources/pdf/airLockers/5-14.pdf

    However the old ones look OK...

    Nevertheless, I have found an alternate solution:
    http://www.aulro.com/afvb/members-ri...ml#post1232422
    Reply With Quote Reply With Quote
« Nissan oil filter for 3.9? | E10 »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!