Reply With QuoteI assume you have a wire coming off one terminal of the relay going to earth? If so, extend that wire to reach to your switch, then put it to earth after the switch.
Fossicker
Hi all, fitted and wired up driving lights through a relay via the highbeem wire benind the head light, all works well, but I would like to fit a secondry swith on the dash board to isolate them if need be but not sure which wire to take from the relay and back to the switch.
your help would be greatley appreciated
Brett
[IMG]file:///C:/DOCUME%7E1/User/LOCALS%7E1/Temp/moz-screenshot.png[/IMG]
ForumSage
I assume you have a wire coming off one terminal of the relay going to earth? If so, extend that wire to reach to your switch, then put it to earth after the switch.
ForumSage
This solution will also make your lights LEGAL. By law, you have to be able to isolate your driving lights while still having high beam on.Originally Posted by BigJon
ForumSage
Correct.
Fossicker
Get the f*@k out of here, easy peasy, thank you, you guys are awsome.
Last edited by Brettsky64; 1st May 2010 at 07:38 PM. Reason: added photo
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks