Results 1 to 4 of 4

Thread: LT95 issues

  1. 11th June 2010, 07:44 PM #1
    oliver1981
    oliver1981 is offline Fossicker
    Join Date
    Jan 2008
    Location
    Canberra ACT
    Posts
    78
    Total Downloaded
    0

    LT95 issues

    Hi all,

    Go to traffic lights Wednesday, 1st gear ready to take off, slight clunk then no drive forward.......

    low range diff lock gives me forward motion...although under slight load can hear groaning and slipping?

    Do you think broken axle or transfer case??

    thanks in advance
    Reply With Quote Reply With Quote
  2. 11th June 2010, 07:54 PM #2
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is online now RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,500
    Total Downloaded
    0
    chain the vehicle back, release the park brake put it in gear with the difflock out and let it try to drive forwards. IT wont but climb under and have a look if one of the shafts is turning you most likely have a snapped axle or torn drive flange on that side
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 11th June 2010, 08:09 PM #3
    400HPONGAS's Avatar
    400HPONGAS
    400HPONGAS is offline Master
    Join Date
    Jan 2010
    Location
    Newman WA
    Posts
    889
    Total Downloaded
    0
    So what happened to High range with Difflock ?
    If it was 1 broken axle then High or low with difflock it would move.
    Sounds like a center diff cross shaft snapped but doesnt explain why it wouldnt move in High range !
    Perhaps you stuffed the Intermediate gear thrusts and the center diff .
    Stick it in gear , let the clutch out and see if either tailshaft is spinning , but you aint moving , then its a axle/hub/gear/pinion problem
    Reply With Quote Reply With Quote
  4. 12th June 2010, 05:12 PM #4
    djam1's Avatar
    djam1
    djam1 is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Melrose SA
    Posts
    2,838
    Total Downloaded
    0
    If it drives in High Range diff lock and its a Stage 1 or Defender my money is on the front RHS axle.
    Reply With Quote Reply With Quote
« Gas torches | lt77 gearstick »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!