Results 1 to 6 of 6

Thread: engine speed fault.

  1. 5th July 2010, 05:50 PM #1
    discowhite's Avatar
    discowhite
    discowhite is offline TopicToaster
    Join Date
    Jan 1970
    Location
    Padstow NSW
    Posts
    4,501
    Total Downloaded
    0

    engine speed fault.

    i keep getting this fault
    FAULT 29-05 engine speed input signal intermittent or missing (logged) 254times.
    its always logged in the abs/sls ecu.

    any ideas?

    cheers phil
    Reply With Quote Reply With Quote
  2. 5th July 2010, 06:24 PM #2
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Mee Too!!!!
    Its one that seems to linger after oil in the harness.
    May be worth checking a few connectors and spraying them with CO2 cleaner.
    I just havent got around to it.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  3. 6th July 2010, 07:15 AM #3
    discowhite's Avatar
    discowhite
    discowhite is offline TopicToaster
    Join Date
    Jan 1970
    Location
    Padstow NSW
    Posts
    4,501
    Total Downloaded
    0
    thanks mate, im still chasing my fuel consumption issue, the new inj harness has taken all the roughness out of the idle but has done nothing to the fuel usage...
    the engine wiring shows no signs of oil at all...
    spose if i replace the engine harness i'll know for sure

    cheers phil
    Reply With Quote Reply With Quote
  4. 6th July 2010, 06:43 PM #4
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Hi Phil
    Try some of the connectors in behind the glove box to see if the oil got there.
    Not the easiest to get to if you have fat hands like me.The other ECUs are all there.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  5. 7th July 2010, 06:33 AM #5
    catch-22
    catch-22 is offline Wizard
    Join Date
    Jan 2007
    Location
    here
    Posts
    1,213
    Total Downloaded
    0
    I thought it might have been the cas. Replaced that but still getting the error codes
    Reply With Quote Reply With Quote
  6. 7th July 2010, 08:41 AM #6
    discowhite's Avatar
    discowhite
    discowhite is offline TopicToaster
    Join Date
    Jan 1970
    Location
    Padstow NSW
    Posts
    4,501
    Total Downloaded
    0
    Quote Originally Posted by LandyAndy View Post
    Hi Phil
    Try some of the connectors in behind the glove box to see if the oil got there.
    Not the easiest to get to if you have fat hands like me.The other ECUs are all there.
    Andrew
    just found all the connectors...all spotless! also found wet carpet underlay

    cheers phil
    Reply With Quote Reply With Quote
« defender chassis welding | PROVENT One Way Check Valve? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!