Thread: disco2 chassis rear shock mounts

hey all,

does anyone have pics or an exploded diagram of the Discovery2 chassis rear shock mount.

does anyone know the angle of the mount in relation to the chassis? would be easy to measure with a bevel along the chassis and the mount.

also interested in the bolting arrangement and/or any washers, spacers etc that are used in the mounting of the shock to chassis.



cheers,
Serg

Bolt size is M12 x 1.75mm about 70mm long with a flat washer. Nut is captive (welded ) inside bracket. Bolt axis is at 45 degrees to chassis. Bolt centre is 15mm below the flat surface inside the spring seat. Space for shocker is 45mm wide. The centre of the shock eye is about 55mm from the chassis. Left hand side shown, there is (hopefully) a matching bracket on the other side...
Cheers!