So before i go out and spend money
I need a new clutch fan for my petrol V8 93 Discovery
So is this the right ford clutch fan alternative
FAN CLUTCH FALCON EB ED EF & EL V8 ... NEW - eBay Other, Cooling Systems, Car, Truck Parts, Cars, Bikes, Boats. (end time 27-Oct-10 17:09:12 AEDST)
Wizard
Depends if your engine is serpentine belt or v-belt: 32mm nut for v and 36 mm for serpentine - and although I've used a trimmed down XD fan with a ford hub on a 91 v8, I've not used a ford hub with a LR fan, nor the later ford hubs/fans on a serpentine v8. Others should be able to add more
Swaggie
The 1993 is non serpentine, and the ford fan hub will fit. The fan itself from memory is too big for the shroud, I think the landy fan will fit though. The hub will take a lot more effort to freewheel because the Ford runs a bigger more aggressive fan, so if you like the howling of a fan then go for it.
JC
The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
The howling is fine
I imagine it would be better for my use i only drive it off road basically and it always under 20kmh so it should be good if its always spinning
So just got the Clutch for the fan and it doesn't fit
The thread is to big so stuck again
The the thread on the water pump is 22.5 and the nut on the ford clutch is 28.5 internal diameter
YarnMaster
SteveOriginally Posted by steve_35
Sent you a PM.
Cheers
Andrew
Swaggie
AND it'll be RH thread too, they've sent you a V8 one! The XF,EA, EB etc 6 cyl hubs are the ones you want.
JC
The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks