Results 1 to 5 of 5

Thread: Voltage Drop

  1. 3rd November 2010, 05:10 PM #1
    molive Guest

    Voltage Drop

    Hi everyone,
    i have a 1993 defender 200tdi. whenever i let the handbrake off the voltage drops, pull it back on and it picks back up to normal. as a result i have been getting odd readings in my temp gauge. i disconected the sender wire for the handbrake and it still does exactlly the same thing.
    anyone comje across the same scenario. any help would be much appreciated.
    thanks matt.
    Reply With Quote Reply With Quote
  2. 3rd November 2010, 05:16 PM #2
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,503
    Total Downloaded
    0
    primary earths to the engine have become suspect and it is now earthing through the handbrake cable.

    if you dont fix it eventually the handbrake cable will either weld itself to the sheath OR will burn through.

    It could also be the park brake light switch has gone to dead short.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 3rd November 2010, 05:24 PM #3
    muddy's Avatar
    muddy
    muddy is online now Master Silver Subscriber
    Join Date
    Jan 1970
    Location
    Gold Coast Hinterland
    Posts
    566
    Total Downloaded
    0
    Hi Molive

    When you apply the hand brake the switch (on hand brake)earths and allows the dash lamp to light up but when you release the hand brake there is a high resistance in the wire to the dash globe. You will have to check this wire for damage eg pinched ,fractured insulation etc

    hope this helps
    Reply With Quote Reply With Quote
  4. 3rd November 2010, 05:42 PM #4
    isuzu110's Avatar
    isuzu110
    isuzu110 is offline Master Supporter
    Join Date
    Jan 1970
    Location
    Camp Hill Queensland
    Posts
    775
    Total Downloaded
    0
    The following is an article intended for northern hemisphere landies that drive on salted roads with resulting underbody rust. They have worse earthing issues than us.

    It may still give you an idea of which places/connections to check

    How to clean the main earthing points on a Land Rover - The Land Rover Blog
    '95 110 300TDI, F&R ARB Lockers, Twine Shower, Aux Sill Tank, Snorkel, Cargo barrier, 9 seats, swingaway wheel carrier, MadMan EMS2
    '85 110 Isuzu NA 4BE1 3.6l Diesel, 0.996 LT-95, Rear Maxi (SOLD)
    '76 SIII 109" Nissan ED33 5-SP Nissan GBox (SOLD)
    Reply With Quote Reply With Quote
  5. 3rd November 2010, 10:25 PM #5
    JDNSW's Avatar
    JDNSW
    JDNSW is online now RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,522
    Total Downloaded
    0
    Almost certainly an engine/chassis earthing fault.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
« cherie-cherie squeak sound front left wheel | Many Thanks »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!