Thread: "Help" TD5 towing van

Originally Posted by dusty disco

Thanks Philip, Damn! For a moment I thought I had a solution to my problem of hot gearbox.

BTW, I have removed the front grille, installed an airflow deflector plate off the bullbar, and rerouted the rear window water pump to spray onto the gearbox cooler in front of the radiator - all of which is working well but it more treating the symptoms than the cause.

Regards
Adrian

I believe that the 4HP22 in a Disco 1 can have the ?valve block? modded to make it lock up in 3rd.
I think JC was have this mod done by some one in Vic, it would be worth asking him.

Tony

Originally Posted by Rosscoe68

i believe the D2 has a torque converter lockup in 2nd gear as well as third and fourth.
probably noone else has bothered trying it, but mine does if i drop it to 2nd on a log climb while towing.

Really! ? ... cool. I'll try it next time I'm out.

If so, then you've got 7 ratio's to play with (2nd lockup being accessed by keeping the stick in "2" on the shifter ... same as 3rd lockup).

1-2-2Locked-3-3Locked-4-4Locked.

So the procedure would be to start off the line with the stick at 2 ... accelerate 1, 2, 2Locked, then shift the stick to 3rd .... 3rd lockup, then shift to 4th ... 4th lockup.

As for the D1 auto 3rd lockup modification, I reckon that should be a must have if your towing. Your vehicles transmission would be so much happier & cooler towing in 3rd locked than 4th slipping it tits off