There was a thread only recently about D1/D2 rads,,,
importing seems cheapest,
might help,
http://www.aulro.com/afvb/discovery-...or-rodded.html
Im overhauling a friends D2A he has just purchased. TD5, auto. Good nick in general. However,the plastic bleed hose fitting on the radiator is held in place with some kind of epoxy. Obviously at some stage it has snapped off.
Is it economical to get the end tank replaced, or is it better to buy a new radiator.
If new radiator, can anyone recommend a low cost option for purchasing a new one?
There was a thread only recently about D1/D2 rads,,,
importing seems cheapest,
might help,
http://www.aulro.com/afvb/discovery-...or-rodded.html
"How long since you've visited The Good Oil?"
'93 V8 Rossi
'97 to '07. sold.
'01 V8 D2
'06 to 10. written off.
'03 4.6 V8 HSE D2a with Tornado ECM
'10 to '21
'16.5 RRS SDV8
'21 to Infinity and Beyond!
1988 Isuzu Bus. V10 15L NA Diesel
Home is where you park it..
[IMG][/IMG]
Personally I would replace it.
Gary CLR in NSW has them for around 360$
I got one from Land Rover in a bit of an emergency and it was around 770$ a couple of years ago
Thanks guys....managed to get a new one from my friendly parts supplier for $300, delivered today.
PROBLEM FIXED.
300 in Oz is a great price
"How long since you've visited The Good Oil?"
'93 V8 Rossi
'97 to '07. sold.
'01 V8 D2
'06 to 10. written off.
'03 4.6 V8 HSE D2a with Tornado ECM
'10 to '21
'16.5 RRS SDV8
'21 to Infinity and Beyond!
1988 Isuzu Bus. V10 15L NA Diesel
Home is where you park it..
[IMG][/IMG]
May as well replace it, I got a genuine one from LR for $300.
Discovery RockSliders
https://www.aulro.com/afvb/the-veran...ies-1-2-a.html
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks