Thread: clutch problems

Hi Guy's,
I have scaned the data base and have not found the problem I have.
The clutch in my 1999 Disco TD5 last week lost pedal pressure so I changed the master and slave cylinders. I gained half a pedal. Pulled the slave out again found that the push rod was worn on the fork end so I clean it up and replaced it regained the pedal 24 hrs later back to half a pedad.
Q1. Dose the push rod push through the end of the fork in this model (TD5)as with tdi.
or
Q2 you simly replace the push rod?

Any thouhgts would be appreciated
Stuart

Originally Posted by Zute

how are you bleeding it ?

As per the instructions in the Manual (Rave)