Results 1 to 5 of 5

Thread: Cooler replacement

  1. 24th May 2011, 08:45 PM #1
    Discomark
    Discomark is offline Master Supporter
    Join Date
    Apr 2010
    Location
    Hornsby NSW
    Posts
    734
    Total Downloaded
    0

    Cooler replacement

    Just picked up a Transmission cooler from a P38 to fit to my 300TDI Disco. I'll need to do some work on the hose's as the existing ones come up from underneath vs out the side on the P38 cooler. The question is will the fittings be the same at the cooler end so I can just replace the rubber hose's in between with longer sections. I'm thinking of using compression fittings on the steel pipes coming from the gearbox and push on fittings for the hose.
    Thanks
    Mark
    Reply With Quote Reply With Quote
  2. 24th May 2011, 08:51 PM #2
    RR P38's Avatar
    RR P38
    RR P38 is offline Master
    Join Date
    Jul 2010
    Location
    Sydney/Balmain
    Posts
    735
    Total Downloaded
    0
    Get the hose Dr onto it, or eNzed.
    You can give them the original steel pipes and they will renew the HP hoses.
    Looking at the original fittings at either end they can make it up as required.
    Reply With Quote Reply With Quote
  3. 24th May 2011, 09:42 PM #3
    slug_burner
    slug_burner is offline TopicToaster Gold Subscriber
    Join Date
    Jul 2007
    Location
    Melbourne
    Posts
    4,024
    Total Downloaded
    0
    Quote Originally Posted by RR P38 View Post
    Get the hose Dr onto it, or eNzed.
    You can give them the original steel pipes and they will renew the HP hoses.
    Looking at the original fittings at either end they can make it up as required.
    What are the likely costs? I have td5 d2a and a p38 cooler I want to fit and wouldn't mind an idea of costs for changing fittings and making up hoses.
    Reply With Quote Reply With Quote
  4. 25th May 2011, 10:48 PM #4
    steveG's Avatar
    steveG
    steveG is offline TopicToaster Subscriber
    Join Date
    Sep 2008
    Location
    Geelong, VIC
    Posts
    4,442
    Total Downloaded
    0
    Quote Originally Posted by slug_burner View Post
    What are the likely costs? I have td5 d2a and a p38 cooler I want to fit and wouldn't mind an idea of costs for changing fittings and making up hoses.
    I got Enzed to replace the rubber sections on my D1 cooler pipes about 18 months ago. They had to cut the old ends off, braze on some new ones and fit the rubber sections. Cost about $120 all up for the 2 pipes.

    Steve
    Reply With Quote Reply With Quote
  5. 27th May 2011, 08:59 AM #5
    goldey's Avatar
    goldey
    goldey is online now Master Supporter
    Join Date
    Apr 2007
    Location
    Newcastle NSW
    Posts
    362
    Total Downloaded
    0
    Same same, I have a 98 tdi Disco auto with the same P38 cooler for the auto and Mr Enzed made up new rubber hoses to my stipulated lengths with new ends to suit the hard lines coming from the auto and the connections on the P38 cooler and it cost $180. That was a bit over 18 mths ago.

    Cheers

    Goldey
    Just arrived: 2012 D4 3.0 HSE, the journey begins again ;-).
    Gone: 98 Disco 300tdi Auto, and some extras
    Reply With Quote Reply With Quote
« question relating to checkvalve - Provent and TD5 | 300Tdi problem »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!