Thread: Beadlocked Rover stud pattern wheel search...

Mach 5 do a 10x16 beadlock

Mach 5 10x16 Beadlock Wheel Bare Steel

You could also try "Allied Wheels" at Deception Bay.

Give them a call and ask the question as some of their beadlock rims come in as blanks and they drill to suit your application.

Try Eastern Wheel Works in Vic. They have done lots of comp rims for Rangies

Thanks for the info guys,

Upon close inspection the tyres rare only in a 37 x 17' and require an 11 inch rim (they are 14' wide). So I'll try all the suggestions and hope someone can come up with the goods.

Cheers

Originally Posted by TeamWB

Thanks for the info guys,

Upon close inspection the tyres rare only in a 37 x 17' and require an 11 inch rim (they are 14' wide). So I'll try all the suggestions and hope someone can come up with the goods.

Cheers

what goodies do you have stuffed inside the axle casings to handle these monsters.......

Originally Posted by uninformed

what goodies do you have stuffed inside the axle casings to handle these monsters.......

24 spl ARB's, cryoed gears and cromo axles all round, and hydro assist.

You raise a good point though, 37" was the max I wanted to go without upgrading diffs, but the extra width and expected grip out of these things will lead to extra torque resistance than a non sticky 10" wide 37" tyre. I'm a careful driver though

Cheers.

G'Day,

I have had 5 made that I no longer need, they are 16 x10 with Disco Centres, They are still raw (unpainted), I have had all the steel bead locks cut out and pilot holes drilled, the inner rings are ready to be welded on.

They are on maximum offset.

It has cost over $1200.00 so far and am open to offers if interested.

PM me if interested.