you can aways cheat . get the rad out for a clean and check then ask if the i c can be done at the same time. i was lucky as the nat rad dude said "why not " no extra charge !
Printable View
you can aways cheat . get the rad out for a clean and check then ask if the i c can be done at the same time. i was lucky as the nat rad dude said "why not " no extra charge !
A hack saw and a drill and you can make something like this -
https://www.aulro.com/afvb/images/im...014/02/281.jpg
The handle on the 'spanner' is 20 x 20 SHS slotted to fit the jaw section which is cut from a piece of 6mm flat.
The 'locking bar' is 20 x 5 flat with appropriate size holes drilled in the end to fit over the 10mm heads of the fan bolts.
Hi I also got the set of spanners from Diff Lock in the UK and the prop shaft tool, A-Frame ball joint driver and the Hub Nut Spanner – tommy bar and 3/4 drive and the shipping was £45 for everything to Tassie so it made it more cost effective.Quote:
Originally Posted by OffTrack
Cheers Peter